NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!
I) FUEL VALVE
( For
-Remove side cover screws using medium phillips screwdriver (See page 13).
-Remove upper shell (See page 9).
-Remove fan (See page 10).
-Pull fuel line (lower and upper) off the fuel valve fittings (See figure 21).
-Disconnet red and orange wires from valve connector (See figure 21).
-Remove 2 screws holding fuel valve and bracket to lower shell Using medium phillips screw driver (See figure 21).
-Remove 2 screws holding fuel valve to Bracket using medium phillps screw driver.(See figure 21).
-Attach new fuel valve to bracket with 2 screws.
-Install new fuel valve and bracket on lower shell with 2 screws.
-Connect red and orange wires (polarity not important) to valve connector (See figue 21).
-Connect upper and lower fuel lines to fuel valve (See figure 21).
-Replace fan, upper shell, side cover.
Electrical Wire | Valve Connector |
| |
| Fuel Line |
| Hose Upper |
Adaptor Nozzle |
|
Fuel Line | Screw |
Hose Lower |
|
| Screw |
| Bracket |
| Valve |
| Valve |
| Fittings |
| Low shell |
Figure 21.
14