Planning & Installation Check List

Unless you are knowledgeable and experienced in stove installation, we recommend your Glow Boy Appliance receive a Pre-delivery Check and be installed by your local Specialty Retailer, NFI (National Fireplace Institute) Pellet Specialist (USA) or WETT Certified Installer (CAN) .

COMPLETE THIS CHECK LIST PRIOR TO INSTALLING YOUR MULTI-FUEL APPLIANCE:

_____	Carefully read this "Owners Manual”. SAVE THIS MANUAL.
_____	Have your local Dealer demonstrate all the operational, cleaning and maintenance steps
	necessary for your stove.
_____	Select a location. The design of your home and the stove placement will determine its value
	as a source of heat. A pellet appliance depends primarily on air circulation to disperse its
	heat. There are other practical considerations, which must be considered before a final
	placement is decided on:
	Existing Chimneys, Pellet Fuel Storage, Aesthetic Considerations, Roof Design (rafter
	locations & roof pitch), Room Traffic, Clearances to Combustibles, and Existing Wiring.
_____ The installation of this appliance must conform to local codes and applicable state and
	federal requirements. Becoming familiar with these requirements before installation is
	essential.
_____	Sign and keep a copy of the Pre-delivery Check List supplied by your Authorized Dealer, OR
	“Dansons Certified Installer”, found inside our appliance or available online.
______	Attach your proof of purchase to this manual and keep on hand for warranty.

COMPLETE THIS CHECK LIST WHILE INSTALLING YOUR MULT—FUEL APPLIANCE:

_____	Carefully read the ENTIRE installation section first.	Twice is better.
_____	Read the Installing Freestanding, Insert or Built-In	sections.

_____ Determine the location and measurement needed your chosen location.

_____ Be sure to pre-fitall items before you install, fasten or install the stove permanently.

Remember measure twice, cut once.

_____ Ensure ALL joints of “PL” vent and single wall stainless steel liner are tightly connected,

sealed with RTV Silicone or Hi-Temp foil tape, including to the exhaust connector, and is correctly installed. (Follow vent manufacturer’s instructions.)

COMPLETE THIS CHECK LIST PRIOR TO LIGHTING YOUR FIRST FIRE:

_____	Obtain final inspection and approval by local building officials.
_____	Carefully clean all marks off the brass, nickel or pewter parts before the first fire is lit. Use a
	soft cloth and a gentle type cleaner. Caution: Never use an abrasive cleaner on any part of your
	stove.
_____	Polish the hopper to remove the oil type coating used in manufacturing.
_____ The high temp. stove paint used on your stove may take several hours of burning at a high fuel
	setting to fully cure. During this time an odor, which is not harmful, may be evident. The area
	around the stove should be well ventilated.
_____ Review and follow the Lighting and Controls Instructions.
_____	Ensure that appliance is connected to a surge protection unit.
_____	Fill the hopper with quality pellets, Close the Hopper Lid, Using the CCI “AcuTron”,
(figure 5), PUSH the FEED RATE Touch Pad and this will start the auger and the combustion fan.

	Glow Boy Home & Shop Heater	www.glowboystoves.com	9

CCGB 1, CCGB 2 specifications

Dansons Group has made significant strides in the manufacturing and distribution of outdoor cooking products, particularly through their innovative brands like Dansons/BBQ and their specialty line of wood pellets. Among their offerings, CCGB 2 and CCGB 1 have garnered considerable attention for their advanced technology and user-friendly features.

CCGB 2 and CCGB 1 are two versatile outdoor grills designed to enhance the grilling experience for both novice and expert cooks. One of the main features of these grills is their precision temperature control, which allows users to set and maintain specific cooking temperatures with unparalleled accuracy. This is achieved through advanced digital thermostatic controls that monitor and adjust the heat output, ensuring consistent performance and preventing unnecessary flare-ups.

Both models boast robust construction, using high-quality materials that are resistant to corrosion and wear, ensuring longevity and durability even in challenging weather conditions. The spacious cooking area is another standout characteristic, allowing users to prepare large quantities of food simultaneously, making them ideal for gatherings and outdoor events.

The CCGB series is also equipped with a unique wood pellet system that delivers exceptional flavor to grilled foods. The ability to choose from a variety of wood pellet types allows users to customize the smokiness and richness of their dishes, enhancing the overall culinary experience. This feature is especially appealing to barbecue enthusiasts who appreciate the subtle differences that wood smoke imparts to meats and vegetables.

In terms of technology, both CCGB 2 and CCGB 1 incorporate Wi-Fi connectivity, enabling users to monitor and control their grills remotely via a mobile app. This innovative feature provides convenience, allowing users to tend to their cooking without being tethered to their grill. Additionally, the app often includes recipes, temperature presets, and cooking tips, further enhancing the grilling experience.

Safety features are also a priority in the design of CCGB 2 and CCGB 1. These grills have integrated heat shields and protective barriers to minimize the risk of burns and ensure safe operation, even for inexperienced users.

In summary, Dansons Group's CCGB 2 and CCGB 1 stand out in the market for their superior temperature control, versatile wood pellet system, durable construction, and innovative technology. These features not only simplify the grilling process but also elevate the outdoor cooking experience, making them essential tools for anyone looking to master the art of grilling.