Dayton 1RVT8, 1RVT7 manual Heater Mounting, Heater Orientation

Page 10

Dayton Installation, Operation, Maintenance and Parts Manual

1RVT7 and 1RVT8

 

 

Dayton® Patio Heaters

Heater Mounting

!WARNING

Improper suspension of the infra-red heater may result in collapse and persons being crushed. Always suspend from a permanent part of the building structure that can support the total force and weight of the heater.

Failure to maintain minimum clearance to combustibles may result in fire and/or explosion, property damage, serious injury or death. Always maintain minimum clearances and post signs or

provided tags (F/N: LL01) where needed. Signs should state the hazards for the particular application and be legible for the building occupants. Consult the factory or a factory representative for additional information on signage compliance.

The heater can be suspended with chains or rigid threaded rod. Local codes, or conditions such as wind drafts or other variables can cause movement of the heater and may require rigid threaded rod. Avoid excessive movement and/or vibration of the gas connection by rigidly mounting the heater. The heater mounting brackets can be used in place of rigid threaded rods (see Figures 2.5 - 2.6). Consult all applicable codes before installation.

The heater must be level from side to side and can be set at an angle between 0° and 30° from horizontal. The gas connection and power cord must be located on the lower side (see Figure 2.4).

Figure 2.4 - Heater Orientation

Mounting bracket

30°

End

End

 

 

The gas connection and

 

Level end to end

 

 

power cord must located

 

 

towards the lower side

 

 

of the heater (towards

 

 

the floor).

 

 

10

Image 10
Contents Not for indoor residential use For Your Safety If you smell gasDescription This heater is not approved for useParts Limited Warranty SafetyMaintenance Standards, Certifications and Government RegulationsApplications SafetyInstallation of a infra-red heater system Commercial / IndustrialCombustible items include Clearance to CombustiblesHazards Include Moving objects include34,000 Natural Gas Chart 1.1 Clearance to Combustibles in Inches see Figure34,000 LP Gas Standards, Certifications and Government Regulations Safety Signs and Labels Lighting InstructionsInstallation DesignPatio Heater Dimensions Heater Mounting Heater OrientationChart 2.1 Recommended Mounting Heights 1RVT7, 1RVT8Wall Mounting Bracket Typical Side Wall MountingChart 2.2 Manifold Pressure Gas SupplyTo connect the gas To disconnect the gasShown installed with a flexible hose Gas Connection120V Typical Field Wiring Electrical RequirementsWhere insufficient air movement exists, induced air VentilationCheck for any possible gas leaks OperationSequence of Operation Starting CircuitLighting Instructions Wiring DiagramsShutdown Instructions Cleaning the main burner MaintenancePeriodic maintenance Before each useChart 4.1 Troubleshooting Guide Symptom Possible Cause Corrective ActionFor Repair Parts, call Repair Parts List for Dayton Patio Heater Limited Warranty

1RVT7, 1RVT8 specifications

Dayton 1RVT8 and 1RVT7 are innovative products designed for various applications while setting new standards in performance and efficiency. These models are primarily designed for HVAC and ventilation systems, providing reliable and cost-effective solutions for both commercial and residential settings.

One of the distinguishing features of Dayton 1RVT8 and 1RVT7 is their energy efficiency. Both models are engineered to minimize energy consumption while delivering optimal airflow. This is achieved through advanced motor technology, which utilizes high-efficiency motors that not only reduce operational costs but also comply with stringent energy regulations. The units operate at low wattages, making them an environmentally friendly choice.

The design of these units emphasizes durability and reliability. Built with high-quality materials, they are constructed to withstand challenging conditions, ensuring a long service life. The robust design minimizes maintenance needs, allowing users to enjoy uninterrupted operation. This reliability is further enhanced by the inclusion of thermal protection, which safeguards the motors from overheating, thus prolonging their lifespan.

Dayton 1RVT8 and 1RVT7 also feature an array of user-friendly controls and settings. The intuitive control panel allows for easy adjustments, offering multiple speed options to cater to specific airflow requirements. This versatility ensures that users can optimize performance depending on their unique needs. Additionally, the units are compatible with various smart home systems, enabling automated control and integration into broader building management systems.

In terms of noise level, both models operate quietly, ensuring minimal disruption in their surroundings. This characteristic is particularly beneficial in environments where noise pollution needs to be reduced, such as offices, healthcare facilities, or residential spaces.

Another key characteristic of Dayton 1RVT8 and 1RVT7 is their compact design. The units are designed to fit in tight spaces, making them suitable for installation in areas where traditional equipment would be impractical. This space-saving feature is a significant advantage for many users looking to optimize their floor plans without sacrificing performance.

Overall, Dayton 1RVT8 and 1RVT7 represent a powerful combination of efficiency, durability, and versatility. They are well-suited for a variety of applications, making them a top choice for users seeking reliable, high-performance ventilation solutions. Whether for heating, cooling, or air circulation, these models deliver on the promise of quality and functionality.