Dayton 1RVT8, 1RVT7 manual Electrical Requirements, 120V Typical Field Wiring

Page 16

Dayton Installation, Operation, Maintenance and Parts Manual

1RVT7 and 1RVT8

 

 

Dayton® Patio Heaters

Electrical Requirements

!WARNING

NOTICE

Incorrect or improper wiring may result in shock, injury or death. Field wiring to the heater must be connected and grounded in accordance with national, state, provincial, local codes and to the guidelines in this

manual. Refer to the most current revisions to the ANSI/ NFPA 70 Standard.

Radiant heat may damage the flexible power cord. Always keep the flexible power cord away from the heater. Do not allow the power cord to be subjected to radiant heat.

Control systems are initiated by 120V control voltage. Important! Proper grounding and polarity are essential. If the system is not properly grounded, it cannot determine the presence of a flame and will lockout and shut off.

Figure 2.9 - 120V Typical Field Wiring

For wiring of controls see Figure 2.9 below. It is recommended that the control be installed on the hot side of a fused supply line and have a sufficient ampere capacity rating for the heater(s) it will control (see Figures 3.1 & 3.2).

Mounting bracket

Heater

120V thermostat, timer or switch (field supplied)

Hot

Neutral

16

Image 16
Contents For Your Safety If you smell gas DescriptionNot for indoor residential use This heater is not approved for useSafety MaintenanceParts Limited Warranty Standards, Certifications and Government RegulationsSafety Installation of a infra-red heater systemApplications Commercial / IndustrialClearance to Combustibles Hazards IncludeCombustible items include Moving objects include34,000 Natural Gas Chart 1.1 Clearance to Combustibles in Inches see Figure34,000 LP Gas Standards, Certifications and Government Regulations Safety Signs and Labels Lighting InstructionsInstallation DesignPatio Heater Dimensions Heater Mounting Heater OrientationChart 2.1 Recommended Mounting Heights 1RVT7, 1RVT8Wall Mounting Bracket Typical Side Wall MountingChart 2.2 Manifold Pressure Gas SupplyTo connect the gas To disconnect the gasShown installed with a flexible hose Gas Connection120V Typical Field Wiring Electrical RequirementsWhere insufficient air movement exists, induced air VentilationOperation Sequence of OperationCheck for any possible gas leaks Starting CircuitLighting Instructions Wiring DiagramsShutdown Instructions Maintenance Periodic maintenanceCleaning the main burner Before each useChart 4.1 Troubleshooting Guide Symptom Possible Cause Corrective ActionFor Repair Parts, call Repair Parts List for Dayton Patio Heater Limited Warranty

1RVT7, 1RVT8 specifications

Dayton 1RVT8 and 1RVT7 are innovative products designed for various applications while setting new standards in performance and efficiency. These models are primarily designed for HVAC and ventilation systems, providing reliable and cost-effective solutions for both commercial and residential settings.

One of the distinguishing features of Dayton 1RVT8 and 1RVT7 is their energy efficiency. Both models are engineered to minimize energy consumption while delivering optimal airflow. This is achieved through advanced motor technology, which utilizes high-efficiency motors that not only reduce operational costs but also comply with stringent energy regulations. The units operate at low wattages, making them an environmentally friendly choice.

The design of these units emphasizes durability and reliability. Built with high-quality materials, they are constructed to withstand challenging conditions, ensuring a long service life. The robust design minimizes maintenance needs, allowing users to enjoy uninterrupted operation. This reliability is further enhanced by the inclusion of thermal protection, which safeguards the motors from overheating, thus prolonging their lifespan.

Dayton 1RVT8 and 1RVT7 also feature an array of user-friendly controls and settings. The intuitive control panel allows for easy adjustments, offering multiple speed options to cater to specific airflow requirements. This versatility ensures that users can optimize performance depending on their unique needs. Additionally, the units are compatible with various smart home systems, enabling automated control and integration into broader building management systems.

In terms of noise level, both models operate quietly, ensuring minimal disruption in their surroundings. This characteristic is particularly beneficial in environments where noise pollution needs to be reduced, such as offices, healthcare facilities, or residential spaces.

Another key characteristic of Dayton 1RVT8 and 1RVT7 is their compact design. The units are designed to fit in tight spaces, making them suitable for installation in areas where traditional equipment would be impractical. This space-saving feature is a significant advantage for many users looking to optimize their floor plans without sacrificing performance.

Overall, Dayton 1RVT8 and 1RVT7 represent a powerful combination of efficiency, durability, and versatility. They are well-suited for a variety of applications, making them a top choice for users seeking reliable, high-performance ventilation solutions. Whether for heating, cooling, or air circulation, these models deliver on the promise of quality and functionality.