Desa UNVENTED (VENT-FREE) PROPANE/LP GAS LOG HEATER Specifications, Replacement Parts

Page 19

OWNER’S MANUAL

SPECIFICATIONS

 

 

 

Golden Oak

Golden Oak

 

Vintage Oak

Vintage Oak

and Birch

and Birch

 

18" Variable

24" Variable

18" Variable

24”, 30”, and 36"

 

Manually

Manually

Manually

Variable

 

Controlled

Controlled

Controlled

Manually Controlled

Btu (Variable)

16,000/27,000

16,000/31,500

16,000/30,000

20,000/39,000

Type Gas

Propane Only

Propane Only

Propane Only

Propane Only

Ignition

Piezo

Piezo

Piezo

Piezo

Pressure Manifold

8.0" W.C.

8.0" W.C.

8.0" W.C.

8.0" W.C.

Inlet Gas Pressure (in. of water)

 

 

 

 

Maximum

14"

14"

14"

14"

Minimum*

11"

11"

11"

11"

* For input adjustment

 

 

 

 

Shipping Weight

27 lbs.

29 lbs.

28 lbs.

30 lbs. (24")/32 lbs. (30")

 

 

 

 

/34 lbs. (36”)

REPLACEMENT PARTS

Note: Use only original replacement parts. This will protect your warranty coverage for parts replaced under warranty.

Parts Under Warranty

Contact authorized dealers of this product. If they can’t supply original replacement part(s), call DESA International’s Techni- cal Service Department at 1-800-323-5190. When calling DESA International, have ready

your name and address

model number of your heater

how heater was malfunctioning

type of gas used (propane or natural gas)

purchase date

Usually, we will ask you to return the defec- tive part to the factory.

Parts Not Under Warranty

Contact authorized dealers of this product. If they can’t supply original replacement part(s), call DESA International’s Parts Department at 1-800-972-7879 for referral information. When calling DESA Interna- tional, have ready

model number of your heater

the replacement part number

ACCESSORIES

Purchase these heater accessories from your local dealer. If they can not supply these accessories, call DESA International’s Parts Department at 1-800-972-7879 for referral information. You can also write to the ad- dress listed on the back page of this manual.

MANUAL SHUTOFF

VALVE - GA5010

For all models. Manual shutoff valve with 1/8" NPT tap. Fits 1/2" NPT pipe.

BLACK FIREPLACE

HOOD - GA6050

For all models. Helps deflect heat away from mantel or wall above fireplace. Fits openings 28" to 48" wide.

BRASS FIREPLACE

HOOD - GA6052

For all models. Helps deflect heat away from mantel or wall above fireplace. Fits openings 28" to 48" wide.

DAMPER CLAMP - GA6080

For manually controlled models. Perma- nently opens chimney flue damper for vented operation.

LAVA ROCK - GA6060

For all models. Order when additional rock is desired. (3 lb. bag)

TECHNICAL

SERVICE

You may have further questions about in- stallation, operation, or troubleshooting.

If so, contact DESA International’s Techni- cal Service Department at

1-800-DESA LOG (1-800-337-2564).

SERVICE HINTS

When gas pressure is too low

pilot will not stay lit

burners will have delayed ignition

heater will not produce specified heat

propane/LP gas supply may be low

When gas quality is bad

pilot will not stay lit

burners will produce flames and soot

heater will backfire when lit

You may feel your gas pressure is too low or gas quality is bad. If so, contact your local propane/LP gas supplier.

104256

19

Image 19
Contents Log Design FLAME-MAXWhat to do if YOU Smell GAS DesignVanguard FLAME-MAX Unvented PROPANE/LP GAS LOG Heater Safety InformationUnpacking Product FeaturesProduct Identification Local CodesDetermining if You Have a Confined or Unconfined Space Determining AIR Flow for Heater LocationUnusually Tight Construction Confined and Unconfined SpaceSmaller than that defined as an Ventilation AIRVentilation Air From Inside Building Ventilation Air From OutdoorsMinimum Fireplace Clearance To Combustible Materials InstallationInstallation Check GAS TypeIf Using Mantel If Not Using MantelMinimum Non Combustible Material Clearances Mantel Clearances Determining Minimum Mantel Clear- ance When using a HoodDeterming Minimum Mantel Clearance Floor Clearances Installing Damper Clamp Accessory for Vented OperationInstalling Heater Base Assembly Installation Items NeededStandard Oak Log Chassis Connecting to GAS SupplyGolden Oak and Birch Model Chassis External Regulator With Vent Pointing Down Test Pressures Equal To or Less Than 1/2 Psig Pressure Testing Heater Gas ConnectionsPressure Testing Gas Supply Piping System Checking GAS ConnectionsFor Vintage Oak Model Installing LogsFor Golden Oak or Birch Models Operating Heater For Your Safety Read Before LightingLighting Instructions Inspecting Burners Cleaning and MaintenanceObserved Problem Possible Cause Remedy TroubleshootingRefer to Air for Combustion and Venti Gas leak. See Warning statement at TopTechnical Service SpecificationsReplacement Parts AccessoriesFLAME-MAX Vintage OAK Models VYS18P and VYS24P Illustrated Parts BreakdownODS Pilot KEY Part Number for VYS18P VYS24P Description QTY Parts List1A* 1A Parts List Warranty Information