Desa SPC-15R, TT30 10, TT15A 10 owner manual Operating Instructions, To Start Heater

Page 5

OPERATING

INSTRUCTIONS

1.Check heater for damage. If heater is damaged, promptly inform dealer where you bought heater.

2.Follow all of the safety and operating pre- cautions.

3.Check the "O" ring on the POL before each use. Replace the "O" ring if there is any sign of wear or damage.

4.Make sure heater regulator knob is in the "OFF" position.

5.30,000 Btu Models Only Attach the heater to the guard on the propane/LP cylinder with the support arm on the inside of the guard and bolts through two holes in the guard (see Figure 5). Tighten the support arm bracket into place us- ing the wing nuts provided.

6.For All Models Connect the POL fitting at regulator to the propane/LP cylinder by rotating the POL nut counter clockwise into the propane/LP cylinder's valve outlet and securely tighten with a wrench.

WARNING: Attach heater in upright position. Never attach heater in a horizontal position. This could lead to dangerous flare-ups or fire.

7.Securely tighten all gas connections.

8.Open the cylinder's gas valve and check all connections for leaks. Apply mixture of liquid soap and water to gas joints. Bubbles forming show a leak that must be corrected. DO NOT USE A FLAME.

Support Arm

Support

Bracket

Arm

Bolt

 

TO START HEATER

WARNING: When lighting the heater DO NOT look over top of heater (reflector). Stand to the side of the heater during ignition. Do not stand or have any part of your body in front of the heater.

WARNING: MAKE SURE THERE IS NO OPEN FLAME IN THE AREA. Fully open the valve on the propane/LP cylinder.

Read all lighting instructions before attempting to ignite heater.

1.Turn the heater regulator knob counterclock- wise to the "HI" position.

2.Repeatedly push and release the piezo ignitor (dual burner), or place a lighted match near the face of the heating element (mesh screen) of the burner you are lighting, using the hole located on the side of the reflector. See Figure 6.

CAUTION: Do not light at the orifice.

3.Depress the red button on the safety valve admitting gas to the burner (see Figure 6).

WARNING:Donotdepressred valve button before repeatedly activating the piezo or inserting match.

Regulator

Figure 5 - Attaching Support Arm and

Regulator to Propane/LP Tank

Red Button on Safety Valve

Figure 6 - Lighting Heater With a Match

113973-01A

www.desatech.com

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Models For Your SafetyCarbon Monoxide Hazard General Hazard Warning Table of ContentsSpecifications Asphyxiation Hazard Safety Information30,000 BTU Models only Assembly InstructionsTo Start Heater Operating InstructionsTo Restart Heater Maintenance StorageTo Stop Heater Replacement Parts Technical ServiceParts Under Warranty Parts not Under WarrantyIllustrated Parts Breakdown Parts List Keep this Warranty Warranty and Repair ServiceModelos Para SU SeguridadAdvertencia Especificaciones Advertencia General DE PeligroTabla DE Contenido Peligro DE Asfixia Información DE SeguridadSólo Para Modelos DE 30.000 BTU Instrucciones DE EnsamblajePara Encender EL Calentador Instrucciones DE FuncionamientoPara Volver a Encender EL Calentador Para Apagar EL CalentadorServicio Técnico ReparacionesPiezas DE Repuesto Piezas CON GarantíaClasificación Ilustrada DE Piezas Lista DE Piezas Guarde Esta Garantía Garantía Y Servicio DE ReparaciónModèles Risque D’EMPOISONNEMENT AU Monoxyde DE CarboneTT15A AvertissementSpécifications Avertissement DE Risque GénéralTable DES Matières Risque D’ASPHYXIE LA SécuritéModèles À 30 000 BTU Uniquement Instructions ’ASSEMBLAGEFixez fermement tous les raccords de gaz Pour Allumer L’APPAREIL DE ChauffagePour Redémarrer L’APPAREIL DE Chauffage Entretien ET EntreposagePour Arrêter L’APPAREIL DE Chauffage Réparation Service TechniquePièces DE Rechange Pièces Sous GarantieVUE Détaillée DES Pièces Liste DES Pièces 113973-01A 113973-01A Conservez Cette Garantie Service DE Garantie ET DE Réparation

SPC-15R, TT15A 10, TT30 10 specifications

Desa TT30 10, TT15A 10, and SPC-15R are innovative products in the realm of industrial tools and equipment, designed to optimize performance, efficiency, and user experience. Each model embodies cutting-edge technology and thoughtful engineering tailored to meet the demands of modern operations.

The Desa TT30 10 is a versatile tool engineered for heavy-duty performance. This model is equipped with a robust motor that delivers high torque, making it suitable for a variety of applications, from manufacturing to construction. Its user-friendly interface includes an ergonomic handle that minimizes fatigue during prolonged use. Additionally, the TT30 10 features an advanced cooling system, which prevents overheating and prolongs the lifespan of the equipment, ensuring it can handle extended work sessions without compromising performance.

On the other hand, the Desa TT15A 10 is recognized for its compact design and lightweight structure, making it an excellent option for those looking for portability without sacrificing strength. This model is particularly advantageous for smaller projects or tight workspaces. The TT15A 10 incorporates a unique vibration-damping technology, which drastically reduces vibrations during operation, leading to enhanced accuracy and comfort. This feature is especially beneficial for precision tasks, allowing users to work more effectively over longer periods.

Meanwhile, the SPC-15R stands out due to its advanced technological integration. This model is equipped with smart features such as real-time monitoring and diagnostics, allowing users to track performance metrics and receive alerts about maintenance needs. The SPC-15R also has a built-in energy-efficient motor that not only conserves power but also reduces operational costs, making it an eco-friendly choice for businesses. Its durable construction, combined with high-quality materials, ensures reliability and longevity, even in the most challenging environments.

Collectively, Desa TT30 10, TT15A 10, and SPC-15R represent a commitment to innovation and excellence in industrial tools. Each model incorporates features and technologies that cater to diverse operational requirements, emphasizing efficiency, durability, and user comfort. Whether for heavy-duty applications or precision tasks, these models provide solutions that meet the varying needs of industries today. As companies continue to seek out tools that enhance productivity while maintaining usability, these Desa models exemplify the future of industrial equipment.
Top Page Image Contents