Desa VMH3000TPA Assembly, AIR for Combustion and Ventilation, Assembling and Attaching Brass Trim

Page 5

ASSEMBLING HEATER

Attaching Brass Font Trim To Front Panel Assembling And Attaching Brass Trim

AIR FOR COMBUSTION AND VENTILATION

5

ASSEMBLY

Continued

ATTACHING BRASS FRONT TRIM TO FRONT PANEL

1.Locate brass front trim in brass trim package.

2.Slide the head of two truss-head screws from hardware packet into each end of brass front trim (see Figure 4).

3.Line up screws with holes in front panel (see Figure 3, page 4). Insert screws in holes. Attach nuts from inside of front panel. Tighten with wrench.

Brass Front Trim

Front Panel

 

Truss-Head

 

Screw

Nut

Figure 4 - Attaching Brass Front Trim to Front Panel

ASSEMBLING AND ATTACHING BRASS TRIM

1.Remove packaging from remaining three pieces of brass trim.

2.Locate four brass screws, two adjusting plates with set screws, and two shims in the hardware packet.

3.Align shim under adjusting plate as shown in Figure 5.

4.Slide one end of adjusting plate/shim in slot on mitered edge of top brass trim (see Figure 5).

5.Slide other end of adjusting plate/shim in slot on mitered edge of side brass trim (see Figure 5).

6.While firmly holding edges of brass trim together, tighten both set screws on the adjusting plate with slotted screwdriver.

7.Repeat steps 1 through 6 for other side.

8.Place the assembled trim on front of heater cabinet. Attach on top and sides with four brass screws included in hardware pack- age (see Figure 6).

9.Reattach front panel to heater if you are going to mount the heater to the base. Do not reattach front panel at this time if you are going to mount heater to wall.

Side

 

Set Screws

 

 

Brass

Adjusting

Top Brass

Trim

Plate

Trim

Screws

Assembled

Brass Trim

Figure 6 - Attaching Brass Trim to Heater

AIR FOR COMBUSTION AND VENTILATION

WARNING: This heater shall not be installed in a confined space or unusually tight construction un- less provisions are provided for adequate combus- tion and ventilation air. Read the following instruc- tions to insure proper fresh air for this and other fuel- burning appliances in your home.

Today’s homes are built more energy efficient than ever. New materials, increased insulation, and new construction methods help reduce heat loss in homes. Home owners weather strip and caulk around windows and doors to keep the cold air out and the warm air in. During heating months, home owners want their homes as airtight as possible.

While it is good to make your home energy efficient, your home needs to breathe. Fresh air must enter your home. All fuel-burning appliances need fresh air for proper combustion and ventilation.

Exhaust fans, fireplaces, clothes dryers, and fuel burning appliances draw air from the house to operate. You must provide adequate fresh air for these appliances. This will insure proper venting of vented fuel-burning appliances.

Shim

Mitered Edge

SlotSlot

Figure 5 - Assembling Brass Trim

For morevisit www..com

109889

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 15,000 to 30,000 Btu/Hr With Thermostat What to do if YOU Smell GASSafety Information Table of ContentsUnpacking Local CodesProduct Identification Assembling Heater Product FeaturesAIR for Combustion and Ventilation AssemblyAttaching Brass Front Trim to Front Panel Assembling and Attaching Brass TrimDetermining FRESH-AIR Flow for Heater Location Providing Adequate VentilationUnusually Tight Construction Confined and Unconfined SpaceVentilation Air From Outdoors Ventilation AIRVentilation Air From Inside Building Installation Items InstallationCheck GAS Type Locating HeaterMounting Heater to Wall Installation OptionsThermostat Sensing Bulb Placing Heater On Mounting Bracket Installing Bottom Mounting ScrewsMounting Heater on Optional Hearth Base See Instructions Included With Mantel Kit Assembling Mantel Securing Hearth Base to FloorMounting Heater to Optional Hearth Base Internally-tinned copper tubing may be used in cer Connecting to GAS SupplyChecking GAS Connections Pressure Testing Gas Supply Piping SystemPressure Testing Heater Gas Connections Lighting Instructions For Your Safety Read Before LightingOperating Heater Inspecting Burner Cleaning Burner Injector Holder and Pilot AIR Inlet Hole Cleaning MaintenanceCabinet Air PassagewaysObserved Problem Possible Cause Remedy TroubleshootingMaintenance, Observed Problem Possible Cause Replacement Parts SpecificationsService Hints Technical ServiceAccessories RFN30TA RFP30TA VMH3000TNA VMH3000TPA Illustrated Parts BreakdownNJF-8C Parts ListFBD Parts CentralsOwners Registration Form Postage Required 109889 Not a UPC

VMH3000TPA specifications

The Desa VMH3000TPA is a state-of-the-art heating appliance designed to deliver efficient warmth while ensuring user comfort and convenience. This model is widely recognized for its innovative technologies, smart design, and eco-friendly features, making it an ideal choice for residential spaces.

One of the standout features of the VMH3000TPA is its powerful heating capacity. With a robust output of 30,000 BTUs, it is engineered to heat large areas effectively, making it perfect for living rooms, open-plan spaces, or even workshops. Users can expect a consistent and reliable warmth throughout the chilly seasons, enhancing home comfort while reducing reliance on traditional heating systems.

The VMH3000TPA incorporates advanced heating technology, including a variable speed blower that allows for more efficient heat distribution. This feature ensures that warm air circulates evenly throughout the room, eliminating cold spots and creating a cozy atmosphere. Additionally, the unit has a programmable thermostat, allowing users to set and maintain their desired temperature easily.

For safety, the VMH3000TPA is equipped with multiple safety features, including an automatic shut-off function that activates if the unit overheats or tips over. This ensures peace of mind, especially in households with children or pets. Its durable construction includes a fireproof casing and a heat-resistant glass front, designed to withstand high temperatures while maintaining an attractive appearance.

The Desa VMH3000TPA is also designed with energy efficiency in mind. It operates on propane or natural gas, providing a cleaner-burning alternative to traditional heating methods. This model complies with environmental regulations, helping to reduce carbon emissions while lowering energy costs.

Another remarkable aspect is its user-friendly interface, which includes remote control functionality. Users can conveniently adjust settings from a distance, enhancing usability and comfort. This modern appliance is not just a heating solution; it is a blend of technology and design, ensuring that it complements any home décor while providing effective heating solutions.

In summary, the Desa VMH3000TPA stands out in the heating appliance market for its powerful performance, intelligent features, energy efficiency, and safety standards, making it a worthy investment for modern households seeking comfort and reliability during the colder months.
Top Page Image Contents