Desa RCLP50VA owner manual Maintenance, Troubleshooting, Observed Fault Possible Cause Remedy

Page 7

OWNER’S MANUAL

MAINTENANCE

WARNINGS

•Never service heater while it is plugged in, connected to pro- pane supply, operating, or hot. Severe burns and electrical shock can occur.

•Keep heater clear and free from combustible materials, gaso- line, and other flammable va- pors and liquids.

•Do not block the flow of com- bustion or ventilation air.

1.Keep heater clean. Clean heater annu- ally or as needed to remove dust and debris. If heater is dirty or dusty, clean heater with a damp cloth. Use house- hold cleaners on difficult spots.

2.Inspect heater before each use. Check connections for leaks. Apply mixture of liquid soap and water to connections. Bubbles forming show a leak. Correct all leaks at once.

3.Inspect hose/regulator assembly before each use. If hose is highly worn or cut, replace.

4.Have heater inspected yearly by a quali- fied service agency.

5.Keep inside of heater free from com- bustible and foreign objects. Remove motor and other internal parts if needed to clean inside of heater (see Service Procedures, page 8).

6.Clean fan blades each season or as needed (see Fan, page 9).

TROUBLESHOOTING

WARNING: Never service heater while it is plugged in, connected to propane supply, operating, or hot. Severe burns and electrical shock can occur.

OBSERVED FAULT

POSSIBLE CAUSE

REMEDY

Fan does not turn when heater is plugged in.

1.

No electrical power to heater

1.

Check voltage to electrical outlet. If volt-

 

 

 

 

age is good, check heater power cord for

 

 

 

 

breaks

 

2.

Fan hitting inside of heater shell

2.

Adjust motor/fan guard to keep fan from

 

 

 

 

hitting inside of heater shell. Bend fan

 

 

 

 

guard if necessary

 

3.

Fan blades bent

3.

Replace fan. See Fan, page 9

 

4.

Defective motor

4.

Replace motor. See Motor, page 8

Heater will not ignite.

1. User did not follow installation or op-

 

eration instructions properly

 

2. No spark at ignitor. To test for spark, fol-

 

low step 9 under Ignitor, page 8. If you

 

see spark at ignitor, have heater serviced

 

by qualified service person. If no spark

 

seen:

 

A) Loose or disconnected ignitor wire

 

B) Wrong spark gap

 

C) Piezo ignitor loose

 

D) Bad ignitor electrode

1.Repeat installation and operation in- structions. See Installation, page 5 and Operation, page 6

2.A) Check ignitor wire. Tighten or reat- tach loose ignitor wire. See Figure 17, page 9 for ignitor wire location

B)Set gap between ignitor electrode and target plate to 4.3 mm (.17 in)

C)Tighten nut holding piezo ignitor to base of heater

D)Replace ignitor electrode. See Igni- tor, page 9

Heater shuts down while running.

1.High surrounding air temperature caus- ing thermal limit device to shut down heater

2.Restricted air flow

3.Damaged fan

4.Excessive dust or debris in surrounding area

1.This can happen when running heater in temperatures above 29° C (85° F). Run heater in cooler temperatures

2.Check heater inlet and outlet. Remove any obstructions

3.Replace fan. See Fan, page 9

4.Clean heater. See Maintenance, above

WARNING: Use only in areas free of high dust content.

105339

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Variable Canadian Propane Construction HeaterPropane Construction Heater Safety InformationUnpacking Product IdentificationPropane Supply Theory Operation AssemblyVentilation InstallationTo Stop Heater Extension Cord Wire Size RequirementsStorage To Start HeaterDo not block the flow of com- bustion or ventilation air MaintenanceTroubleshooting Observed Fault Possible Cause RemedyElectrical System Service ProceduresMotor Ignitor FANRCLP50VA Illustrated Parts BreakdownKEY Part Description QTY Parts ListParts Under Warranty SpecificationsReplacement Parts Accessories105339 Repair Service Warranty ServiceManuel D’UTILISATION Avertissements Informations Concernant LA SécuritéNombre de DéballageAlimentation EN Propane Identification DU ProduitAIR Forcé Principe DE FonctionnementAssemblage Alimentation EN CombustiblePositionnement du détendeur Remise EN Marche FonctionnementMise EN Marche Arrêt DE L’APPAREILEntretien RemisageProblème Cause Possible Remède DépannageCircuit Électrique Procédures ’ENTRETIENMoteur Allumeur VentilateurPièces Sous Garantie AccessoiresCaractéristiques Pièces DétachéesVUE Éclatée DES Pièces Pièce DE RÉF Description QTÉ Liste DES PiècesConserver Cette Garantie Garantie Limitée Service DE RéparationsRéparations Sous Garantie

RCLP50VA specifications

Desa RCLP50VA is an innovative and efficient heating solution designed to meet the modern demands of both residential and commercial environments. This model stands out due to its advanced technology and user-friendly features, making it a preferred choice for heating needs.

One of the most prominent features of the Desa RCLP50VA is its high-efficiency performance. It utilizes state-of-the-art combustion technology to deliver robust heating output while minimizing energy consumption. This efficiency not only reduces utility bills but also contributes to a more sustainable energy footprint, aligning with the growing demand for environmentally responsible appliances.

The unit is powered by liquid propane, which ensures consistent and reliable heat during cold weather conditions. Its versatile design allows it to be installed in various settings, providing users with flexibility in heating larger spaces. The heating capacity of the Desa RCLP50VA is substantial, making it suitable for workshops, garages, and even larger residential areas.

Another key characteristic of the RCLP50VA is its safety features. It includes an automatic shut-off function that activates in case of overheating or other malfunctions. This feature provides peace of mind to users, ensuring safe operation even in busy environments. Additionally, it is equipped with a built-in oxygen depletion sensor, which monitors air quality and halts operation if harmful levels of carbon monoxide are detected.

The construction of the Desa RCLP50VA emphasizes durability and longevity. It boasts a rugged exterior designed to withstand the rigors of both industrial and residential use. The materials employed are resistant to corrosion, ensuring the unit maintains its performance over time.

The user interface of the RCLP50VA is straightforward, with an easy-to-read control panel that allows users to adjust temperature settings and monitor operational status. This intuitive design eliminates confusion, making it accessible for all users, regardless of their technical expertise.

In conclusion, the Desa RCLP50VA is a top-tier heating solution characterized by its efficiency, safety features, and user-friendly design. Its advanced technologies and robust construction make it an ideal choice for anyone looking to invest in a reliable and effective heating system that meets the demands of today’s energy-conscious consumers.
Top Page Image Contents