Desa RCLP50VA owner manual Service Procedures, Electrical System, Motor

Page 8

PROPANE CONSTRUCTION HEATER

SERVICE

PROCEDURES

You can also visit DESA International’s

Technical Service web site at

www.desatech.com.

WARNING: Never service heater while it is plugged in, con- nected to propane supply, oper- ating, or hot. Severe burns and electrical shock can occur.

ELECTRICAL SYSTEM

The entire electrical system for this heater is contained within the motor. If any part of the

Figure 10 - Removing Motor and Fan Guard from Heater

electrical system is damaged, you must re- place motor.

MOTOR

1.Remove three screws that attach fan guard to heater shell.

2.Remove motor and fan guard from heater shell (see Figure 10).

3.Use hex wrench to loosen set screw which holds fan to motor shaft (see Fig- ure 11). Remove fan. Be careful not to damage the fan blade pitch.

4.Remove two nuts and two screws that attach fan guard to motor using nut- driver. Remove fan guard from motor (see Figure 12).

5.Disconnect the green power cord wire from motor and remove black and white wire terminals.

6.Discard old motor.

7.Attach green power cord wire to motor.

8.Attach fan guard to new motor with two nuts and two screws.

9.Replace black and white terminals.

10.Place fan onto motor shaft of new mo- tor. Make sure set screw contacts flat surface on motor shaft. Tighten set screw firmly (40-50 inch-pounds).

11.Place motor and fan guard into rear of heater shell. Make sure power cord is properly located (see Figure 13).

12.Insert three screws through heater shell and into fan guard. Tighten screws firmly.

Setscrew

 

Figure 11 - Setscrew Location

Figure 12 - Removing or Attaching Fan

 

Guard from Motor

Figure 13 - Replacing Motor and Fan Guard into Heater

8

105339

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Canadian Propane Construction Heater VariableSafety Information Propane Construction HeaterPropane Supply Product IdentificationUnpacking Assembly Theory OperationInstallation VentilationExtension Cord Wire Size Requirements StorageTo Start Heater To Stop HeaterMaintenance TroubleshootingObserved Fault Possible Cause Remedy Do not block the flow of com- bustion or ventilation airMotor Service ProceduresElectrical System FAN IgnitorIllustrated Parts Breakdown RCLP50VAParts List KEY Part Description QTYSpecifications Replacement PartsAccessories Parts Under Warranty105339 Warranty Service Repair ServiceManuel D’UTILISATION Informations Concernant LA Sécurité AvertissementsDéballage Alimentation EN PropaneIdentification DU Produit Nombre dePrincipe DE Fonctionnement AssemblageAlimentation EN Combustible AIR ForcéPositionnement du détendeur Fonctionnement Mise EN MarcheArrêt DE L’APPAREIL Remise EN MarcheRemisage EntretienDépannage Problème Cause Possible RemèdeMoteur Procédures ’ENTRETIENCircuit Électrique Ventilateur AllumeurAccessoires CaractéristiquesPièces Détachées Pièces Sous GarantieVUE Éclatée DES Pièces Liste DES Pièces Pièce DE RÉF Description QTÉRéparations Sous Garantie Service DE RéparationsConserver Cette Garantie Garantie Limitée

RCLP50VA specifications

Desa RCLP50VA is an innovative and efficient heating solution designed to meet the modern demands of both residential and commercial environments. This model stands out due to its advanced technology and user-friendly features, making it a preferred choice for heating needs.

One of the most prominent features of the Desa RCLP50VA is its high-efficiency performance. It utilizes state-of-the-art combustion technology to deliver robust heating output while minimizing energy consumption. This efficiency not only reduces utility bills but also contributes to a more sustainable energy footprint, aligning with the growing demand for environmentally responsible appliances.

The unit is powered by liquid propane, which ensures consistent and reliable heat during cold weather conditions. Its versatile design allows it to be installed in various settings, providing users with flexibility in heating larger spaces. The heating capacity of the Desa RCLP50VA is substantial, making it suitable for workshops, garages, and even larger residential areas.

Another key characteristic of the RCLP50VA is its safety features. It includes an automatic shut-off function that activates in case of overheating or other malfunctions. This feature provides peace of mind to users, ensuring safe operation even in busy environments. Additionally, it is equipped with a built-in oxygen depletion sensor, which monitors air quality and halts operation if harmful levels of carbon monoxide are detected.

The construction of the Desa RCLP50VA emphasizes durability and longevity. It boasts a rugged exterior designed to withstand the rigors of both industrial and residential use. The materials employed are resistant to corrosion, ensuring the unit maintains its performance over time.

The user interface of the RCLP50VA is straightforward, with an easy-to-read control panel that allows users to adjust temperature settings and monitor operational status. This intuitive design eliminates confusion, making it accessible for all users, regardless of their technical expertise.

In conclusion, the Desa RCLP50VA is a top-tier heating solution characterized by its efficiency, safety features, and user-friendly design. Its advanced technologies and robust construction make it an ideal choice for anyone looking to invest in a reliable and effective heating system that meets the demands of today’s energy-conscious consumers.
Top Page Image Contents