Samsung VR20K9350WK/ML manual Charging, Use, Cleaning and maintenance

Notes and cautions

Charging

Note

ffIf the battery overheats during charging, it may take longer to charge.

ffWhen automatic charging is not working, please check the followings.

–– Turn the emergency switch (on the bottom of POWERbot) off and on again.

–– Unplug the docking station's power plug and then plug it back on.

–– Check whether there is any foreign matter in the charge pins and clean POWERbot and the charge pins of the docking station with a dry cloth or rag.

–– Check for any obstacles such as reflective objects, chairs, etc. near the docking station.

ffIf POWERbot is left detached from the docking station, the battery will drain naturally.

–– Try to keep POWERbot being charged on the docking station. (Turn off the emergency switch and leave the docking station unplugged when planning to leave the house for long periods of time by going on a business trip or vacation, etc., )

In use

ffThe POWERbot cannot vacuum clumps of dirt, so some may remain on the floor after cleaning.

–– Please use another cleaning tool to clean them regularly.

ffIf the battery becomes low during Auto clean mode, POWERbot will recharge and finish cleaning the remaining area after recharging. (Repeat cleaning frequency: 1 time)

ffYou cannot select and execute Spot clean mode while charging.

ffIf you press Manual clean / Point cleaning button while charging, the POWERbot will be detached from the docking station and then turn into the standby mode.

ffDo not lie down around the POWERBOT that is running.

–– Your hair may be caught in the Pet brush, resulting in physical injury

Cleaning and maintenance

Note

ffIf you washed the dustbin and filter with water

–– Dustbin: Completely wipe out the water.

–– Filter: Completely dry it in a shade before use.

Note

ffThe POWERbot may get caught on thresholds, etc. during cleaning.

–– To restart operation, shut off the emergency switch, move POWERbot to an area where it can move easily and then turn on the power again.

ffThe POWERbot cannot completely clean areas it cannot enter, such as corners, between the wall and sofa, etc.

–– Please use another cleaning tool to clean them regularly.

Caution

ffWatch your finger when attaching or detaching the filter, since they may get stuck in the dustbin's intake.

ffTo avoid blockages by foreign matter, do not let toothpicks, cotton swabs etc. from being vacuumed by POWERbot.

ffIf it is difficult to remove foreign matters from the Pet brush, contact a service center.

ENGLISH-31