Samsung VC12H7050HD/ML manual Troubleshooting, Problem Solution

Troubleshooting

PROBLEM	SOLUTION
Motor does not start.	• Check cable, pulg and socket.
	• Leave to cool.
Suction force is
gradually decreasing.
	• Check for blockage and remove.
In operation, the
	• Please unclog the intake.
vacuum cleaner stops
after repeating runs
and stops three times.
Cord does not rewind	• Pull the cord out 2-3 m and push down the cord rewind button.
fully.
Vacuum cleaner dows	• Check hose and replace if required.
not pick up dirt.
Low or decreasing	• Please check filter and, if required, clean as illustrated in the
	instructions. if filters are out of condition change them to new
suction.
	ones.
Body overheating.	• Please check filters, if required clean as illustrated in the
	instruction.
Static electicity	• Please decrease power suction.
	• This can also occur when air in the room is very dry.
discharge.
	Please ventilate the room till air humidity becomes normal.
The vacuum cleaner	• In order to protect the motor in the cleanr, it rotates slowly when
	you just turn on the cleaner.
makes a strange
	(Before the motor stabilizes,) this causes the loud noise at the
noise.
	initial state and it is not failure in the machine.

English - 19