Cleaning the PRE-MOTOR Filter

	Unlock	Micro Filter
	Unlock	Lock
		Lock

Filter Case Form Filter

Filter Case

Washable

The Pre-Motor Filters (Form Filter, Micro Filter) protect the motor from dirt particles. It is located underneath the Dust Bin. If the Pre-Motor Filters become dirty, remove and clean filters according to following instruction.

1.Unplug the Vacuum Cleaner from electrical outlet.

2.Remove dust bin as described in Empty Dust Bin section.

3.Unlock and remove the filter case.

4.Lift out filter case.

5.Separate form filter and micro filter from filter case.

6.Wash filters and case in cold water only.

7.Dry for at least 24 hours.

8.Ensure filters are completely dry before refitting onto the vacuum cleaner.

The Pre-Motor Filter may be hand washed in cold water with mild detergent. Rinse well and air dry throughly before re-installing.

CLEANING THE EXHAUST FILTER

✽ Option

Micro Foam

Filter

Exhaust Filter

Case

<Hepa Filter>	<Micro Foam Filter>
(Select Models Only)	(Select Models Only)

The Micro foam filter will separate from the exhaust filter case, but the Hepa filter will not separate from the exhaust filter case.

Inspect the exhaust filter regularly for dust accumulation, and clean if necessary.

1.Unplug the Vacuum Cleaner from electrical outlet.

2.The Exhaust Filter assists in the filtration process to return clean air to the room. It is located in the Exhaust Filter Case on the front of the cleaner. If the Exhaust Filter becomes dirty, remove and clean filter.

The Exhaust Filter is not washable. It must be cleaned in air or replaced when it becomes dirty.

Check the Pre-Motor filter and Exhaust filter at least once a month and clean or replace as needs.

maintenance _11

03 MAINTENANCE