Samsung VCU6780S3A/XFA manual Picker Drum Maintenance

Page 13

PICKER DRUM MAINTENANCE

To reduce the risk of injury from moving parts, turn off vacuum cleaner and disconnect WARNING Power Plug from electrical outlet.

1. Unplug cleaner from electrical outlet.

2. Place handle in low position and turn vacuum cleaner over so bottom side is up.

3. Remove the six screws as shown with a screwdriver.

4. Grasp Picker Drum at both ends and lift.

5. Clean strings, hair and other debris from Picker Drum, paying

Brush Cover

particular attention to Drum ends.

 

6.Replace the cleaned Picker Drum down into both end slots as shown.

7. Reposition Brush Cover and screw or snap back into place. Check to be sure all screws or latches are secured.

03 MAINTENANCE

①

②

maintenance _13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Vacuum Cleaner Important Safeguards Safety InformationSafety Information Contents Product View Assembling the cleanerAttach Vacuum Hose and Tools Attach Handle to VacuumPower Cord Operating the cleanerPower Switch Handle Positions Height AdjustmentCarrying Handle Dust BIN Handle Cleaning ToolsEmpty Dust BIN MaintenanceCleaning the Exhaust Filter Cleaning the PRE-MOTOR FilterReplace Brush Drum and Drive Belt Check Brush Drum and Drive BeltPicker Drum Maintenance Mini Turbo Brush *select models only Petz Turbo Brush *select models only Problem Possible Solution Troubleshooting
Top Page Image Contents