Samsung VCU6780S3A/XFA manual Petz Turbo Brush *select models only

Page 15

PETZ TURBO BRUSH (*select models only)

The Petz Turbo Brush should be checked regularly for clogs or debris wrapping around the brush.

1. Unplug the vacuum from electrical outlet.

2. If a clog is present or debris is visible, unscrew the two screws on the back of the Petz Turbo Brush to remove the faceplate and clear any obstructions.

3.To clean debris from the brushroll, remove the brushroll from the drive belt and clean debris.

4.Reposition the drive belt on the brushroll.

Place ends of brushroll in slots on sides. Reposition faceplate and secure with two screws.

This tool is designed to remove pet hair from upholstered or carpeted surfaces. It should not be used on pets.

03 MAINTENANCE

maintenance _15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Vacuum Cleaner Important Safeguards Safety InformationSafety Information Contents Product View Assembling the cleanerAttach Vacuum Hose and Tools Attach Handle to VacuumOperating the cleaner Power CordPower Switch Handle Positions Height AdjustmentCarrying Handle Dust BIN Handle Cleaning ToolsEmpty Dust BIN MaintenanceCleaning the Exhaust Filter Cleaning the PRE-MOTOR FilterReplace Brush Drum and Drive Belt Check Brush Drum and Drive BeltPicker Drum Maintenance Mini Turbo Brush *select models only Petz Turbo Brush *select models only Problem Possible Solution Troubleshooting
Top Page Image Contents