operating the cleaner
POWER CORD
1. PULLING OUT
The power cord is long enough to be drawn out for convenience.
2. REWINDING
Upon finishing cleaning, disconnect the plug from the electrical outlet and press the cord rewind button lightly with your toe. And then place the plug into the guide hole on the body as shown.
When removing the plug from the electrical outlet, grasp the plug, not the
CAUTION cord.
Do not pull the power cord beyond the yellow indicator
CAUTION and take care when rewinding the power cord to prevent |
|
the plug hitting the vacuum or the user. | Yellow Indication |
|
3. CORD CLIP
Place the power cord into the cord clip on the body as shown. This helps keep the power cord out from under the vacuum cleaner nozzle.
4. PLUG IN
Plug the polarized power cord into a 240 Volt outlet located near the floor.
POWER SWITCH
1. The power switch is located on the top of the vacuum body. Push the rocker switch “ON” to vacuum, and “OFF” when cleaning is complete.
OFF |
ON
02 OPERATING THE CLEANER
operating the cleaner _7