Samsung VCU3360S31/SML manual SpEcIAL ON-BOARd Tools, POwER cORd Storage

Page 7

Operating the cleaner

SpEcIAL ON-BOARd TOOLS

Your vacuum is not only a powerful carpet and rug cleaner, it’s also a versatile above fl oor vacuum cleaner when you select one of the special tools.

1.Raise Handle to Upright Position.

2.Grasp the end of the Hose Wand and lift Hose Wand to separate from the Hose Wand Base.

3.Attach tools by fi rmly pushing onto Vacuum Hose or Extension Wand.

combination dusting Brush/Upholstery Tool:

Two Types of cleaning tools are included in one attachment: rotate for desired tool.

Use Brush side to dust furniture, blinds, books, lamps, shelves, and baseboards.

Use Upholstery side for curtains, draperies, cushions, fabrics.

crevice Tool:

Use in tight narrow spaces.

Extension wand:

Use with desired attachment for a longer reach.

Mini Turbo Brush (Select Models):

Use rotating brush action for small areas such as stairs and upholstery.

 

 

02

Quick Release

 

OpERATING

Cord Wrap

Crevice

 

Power Cord

Tool

 

 

THE

 

Extension

 

Wand

cLEANER

Combination

 

Dusting Brush/

 

Upholstery Tool

Hose

 

 

Wand

 

 

Hose

 

 

Wand

 

 

Base

 

*option

 

 

Select Models Only

Note: Press gently when using Mini Turbo Brush to gain maximum cleaning. Too much pressure could cause the brush to stop rotating.

pOwER cORd STORAGE

1.To use your vacuum, remove the cord and plug it into an electrical outlet. For your convenience, there is a quick release cord wrap for easy cord removal.

2.When you are fi nished cleaning, turn vacuum cleaner off.

3.Unplug power cord by grasping the polarized plug (NOT the cord) and disconnect from outlet.

4.Loop power cord around cord wraps on the back of the vacuum as shown.

5.Clip molded plug to power cord to secure.

operating the cleaner _7

Image 7
Contents Thank you for purchasing a Samsung product Vacuum CleanerIMpORTANT Safety INSTRUcTIONS Safety informationStore your vacuum cleaner indoors, in a cool and dry area Contents Product View Assembling the cleanerATTAcH dUST BIN to VAcUUM ATTAcH HANdLE to VAcUUMATTAcH VAcUUM Hose ANd Tools TRANSpORTING cLEANER Operating the cleanerPOwER SwITcH Height AdJUSTMENTSpEcIAL ON-BOARd Tools POwER cORd StorageCLEANING the Grille MaintenanceEMpTY dUST BIN Micro Filter CLEANING the pRE-MOTOR FilterREpLAcING the pOST-MOTOR Filter Post-Motor FilterBrush Cover Motor Pulley Air CHEcK Rotating Brush ANd dRIVE BeltHook Replace brushbar and bottom plate Mini Turbo BrushTroubleshooting