Operating the cleaner
pOwER SwITcH
The Power Switch is located on the side of the vacuum. Push the rocker switch "ON" to vacuum, and "OFF" when cleaning is complete.
HANdLE pOSITIONS
Press the handle release pedal, located on the lower left side of the vacuum, with
your foot to place your vacuum into one of three cleaning positions.
1.Upright
–For storage and above fl oor cleaning with tools.
. Normal Cleaning
–Press handle release pedal once. Position used for most household fl oor cleaning tasks.
. Low Cleaning
–With the vacuum in normal cleaning position, press handle release pedal again. Use for reaching under low furniture such as tables, chairs or beds.
HEIGHT AdJUSTMENT
①
②
③
The Powerfoot/Rotating Floor Brush can be adjusted to clean several fl oor surfaces.
Note: For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is diffi cult to push, adjust to the next higher setting.
1. Turn Height Adjustment Knob to desired setting.
Lowest Setting
– For bare fl oors.
Medium Settings
– For short and medium pile carpets.
Highest Setting
– For plush pile carpet
TRANSpORTING cLEANER
1.To move your cleaner from room to room, put the Handle in the upright position, tilt the cleaner back on its rear wheels and push forward.
2.The cleaner can also be moved
by using the Carrying Handle located on the top of the Dust Bin.
Carrying |
Handle |
6_ operating the cleaner