Maintenance
cLEANING THE pRE-MOTOR FILTER
Sponge
Filter
Micro
Filter
< washable >
1. Unplug the Vacuum Cleaner from electrical outlet.
2.The Pre-Motor Filter(Sponge Filter, Micro Filter) protects the motor from dirt particles. It is located underneath the Dust Bin.
If the Pre-Motor Filter becomes dirty, remove and clean it.
Note: The Pre-Motor Filter may be hand washed in cold water with mild detergent. Rinse well and air dry thoroughly before re-installing.
03 MAINTENANcE
REpLAcING THE pOST-MOTOR FILTER
<Micro Filter>
(Select Models Only)
<Hepa Media Filter>
(Select Models Only)
1.Unplug the Vacuum Cleaner from electrical outlet.
2.The Post-Motor Filter assists in the fi ltration process to return clean air to the room. It is located behind the door on the front of the Cleaner. When the fi lter becomes dirty, open the door, remove the fi lter and replace.
Note: The Post-Motor Filter is a white, pleated HEPA media fi lter. This fi lter is not washable and must be replaced when it becomes dirty.
