Samsung SDC3C801/XFA manual Door Reversal

installing your dryer

DOOR REVERSAL

Depending on your requirements (installation location, space constraints), you can change the direction the door opens.

	This is done according to the customer’s needs. The qualified technician or customer can do this
WARNING themselves directly.
1.	Unplug the power cord.	Frame-Front
		Assy-Door
2.	Remove the two screws from the door-hinge.
3.	Lift the door to separate it.

Hinge-Door

4. Remove the 16 screws.

5.	After removing the screw, rotate the holder-glass, the door-glass, and the	Door-Glass
	cover-door (I) by 180˚ as shown in the figure.	Holder-Glass
	• Since the holder-glass, the door-glass, and the cover-door (I) are not
CAUTION	completely fixed, rotate them holding the lower part so that they are
	not separated.
	• Work carefully so that the door-seal is not removed.
		Seal-Door
		Cover-Door(I)

6.After rotating them by 180˚, hold them in the position as shown by the

figure.

7.Assemble the glass-holder in the correct direction. (After the

disassembly, assemble it by rotating it by 180˚.)

16_ installing your dryer

SDC18809X-02805K-05_EN.indd Sec3:16 2013-07-04 ￿￿ 2:24:31