8.Fasten the 16 screws in the correct positions.
9.Note that two of the screws have a different length from the others. (Use the longer screws for the
10.Move the position of the screw at the back of the
11.Fasten the screw in the bottom hole.
12.Remove the two screws holding the
13.Remove the two screws holding the
01 INSTALLING YOUR DRYER
Holer-Lever
14.Now, move to the right side of the product and fasten the two screws holding the
15. Align the door with the fixing holes.
16. Fasten the two screws holding the
Inside the drum
You can restore the direction the door opens by following the procedures above, if necessary.
installing your dryer _17