installing your dryer
TOOLS NEEDED FOR INSTALLATION
Hire a professional to install this dryer properly. If there is a service call performed as a result of poor setup, adjustment, and connection, it is considered the responsibility of the installer. If you install the dryer you are responsible.
Make sure you have everything necessary for proper installation (AC 220~240 V / 50 Hz, AC220 V / 60 Hz (Philippines Only)).
1.A GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements (See page 11).
2.CONDENSING SYSTEM - Condenses, processes and circulates hot and humid air internally using an internal heat condenser.
SEE DRYER EXTERIOR
Plug
Work top 
Control panel
Water tank 
Door
Filter case
Condenser
Levelling feet
Parts
01 INSTALLING YOUR DRYER
Hose guide | Cable tie | Hose connector Long drain hose (2m) Manual book |
installing your dryer _9