installing your dryer
INSTALLATION SIDE BY SIDE
For proper installation, we recommend that you hire a professional. To install:
1.Move your dryer to an appropriate location for installation. Consider
| installing the dryer and washer | Level |
|
| |
| both |
|
2. | Set your dryer back in an upright position. |
|
3. | To ensure that the dryer provides optimal drying performance, it must |
|
| be level. To minimize vibration, noise, and unwanted movement,the |
|
| floor must be a perfectly level, solid surface. |
|
To set the dryer to the same height as the washer, fully retract the levelling feet by turning them counterclockwise, then loosen the legs by turning them clockwise
Retract fully
Levelling feet
Then loosen
Adjust the levelling feet only as much as necessary to level the dryer.Extending the levelling feet more than necessary can cause the dryer to vibrate.
4.Review Electrical Requirements section (See page 11).
BEFORE OPERATING OR TESTING.
5.With a level, check your dryer and make necessary adjustments to the levelling legs.
6.Plug in your dryer, and check operation by using the checklist below.
FINAL INSTALLATION CHECKLIST
Dryer is plugged into electrical outlet and is properly grounded.
Dryer is leveled and is sitting firmly on the floor.
Start your dryer to confirm that it runs, heats, and shuts off.
English - 12