DRAINING WATER WITHOUT USING THE WATER TANK
You can use the dryer without using the water tank by following the procedures below.
CONNECTING THE DRAIN HOSE
The Dryer can pump the condensed water outside of the DRYER directly with dain hose provide.
The procedures to connect the drain hose are as follows.
02 INSTALLING YOUR DRYER
1. Disconnect the drain hose A .
A |
2. | Connect the drain hose | A to the other hole. |
|
| |
|
|
|
|
| A |
3. | Connect accessory hose(long drain hose) | B | to the hole | B | |
|
|
|
|
|
next to the hole that is connected to drain hose A .
•When connecting hose B , take care that the height
CAUTION of the hose does not exceed 90cm.
•After connecting the drain hose, you can directly drain the condensed water via the
English - 13