Quadra-Fire 32198A Accessories, By the regulatory authority having jurisdiction

R

Cape Cod Wood Stove

ACCESSORIES

The Cape Cod has several options available for installation and appearance. These options are packaged and sold separately and are listed below.

It is a good idea to plan your installation on paper, using exact measurements for clearances and floor protection, before actually beginning the installation. If you’re not using an existing chimney, place the stove where there will be a clear passage for a factory-built listed chimney through the ceiling and roof.

AVOID FIRE: Maintain the designated clearances to combustibles. Insulation must not touch the chimney. You must maintain the designated air space clearance around the chimney. This space around a chimney is necessary to allow natural heat removal from the area. Insulation in this space will cause a heat buildup, which may ignite wood framing. NOTE: Clearances may only be reduced by means approved

by the regulatory authority having jurisdiction.

We also recommend that you have a qualified building inspector and your insurance company representative review your plans before installation.

*If you install Hearth Legs please note that you can install an Outside Air Kit or Blower but not both.