R
Cape Cod Wood Stove
REAR VENT INSTALLATIONS
CLEARANCES
MINIMUM CLEARANCES TO COMBUSTIBLES
(In inches and millimeters)
FIGURE 4
In a Masonry Fireplace OR Through the Wall: Six inch (6") diameter listed double wall air insulated connector pipe with listed
A | B | C | D | E | F | G | H | I |
N/A | N/A | 27.5"(698) | 18"(457) | N/A | N/A | 41"(1041) / 15"**(381) | N/A | 12" (305), |
|
|
|
|
|
|
|
| 6"*(152) |
Max 8"
G
G
C
L
I26-5/8"
FIGURE 4
*With 52" high x 42" wide wall protection spaced 1" from combustible surface..
WALL PROTECTOR SPECIFICATIONS: MUST BE A MINIMUM OF 24 GAUGE SHEET METAL WITH A 1" (25MM) AIR SPACE BETWEEN SHEET METAL AND COMBUSTIBLE WALL. SHEET METAL MAY THEN BE COVERED WITH BRICK OR TILE.
**Maximum 8" deep mantel with heatshield spaced 1" from bottom mantel surface.
CAUTION!
The baffle and kaowool blanket placement is crucial to the optimum performance of the Cape Cod. Follow the steps on pages 32 & 33 (Chimney Cleaning), carefully to ensure proper placement of baffles and kaowool at time of initial installation and following chimney cleaning.
If further clearances are needed, obtain requirements for construction of a protected wall from your local building code authorities and their allowable reductions of the listed clearances.
32198A February 15, 2002 | Page 9 |