Quadra-Fire CB1200M-MBK Installing Logo, Top Log, Left, Right, Front Log Holes. See Figure

Page 21

R

CB 1200 Pellet Stove

F. Optional Log Set Placement Instructions

G. Optional Gold or Nickel Grille Assembly

CAUTION

Logs are FRAGILE. Use extreme care when handling or cleaning logs.

1.Place the front log in first as shown in Figure 21.1. Place log between firepot and face of appliance with charred area surrounding firepot.

2.Set the left and right logs onto the front log, placing the holes in the base of the left and right logs over the locating pins in front log. See Figure 21.2. Ensure that the charred ends are facing the firepot.

LOCATING PINS

Figure 21.1

CAUTION

Do not open top all the way back so the weight of the top is supported by the hinges. It will damage the hinges. It will be necessary to prop the top up with a supporting brace. You can use the shipping box as shown in Figure 1.

1.Remove grille from packaging.

2.Lift top up and place shipping box in vertically.

3.Place 1 flap of the box lid into opening for stability.

4.Align the 3 holes in the stove with the holes in the grille.

5.Use a Phillips screwdriver to secure in place.

6.Remove shipping box and lower top.

Align the 3 hoes in the stove with the holes in the grille and secure in place.

Place 1 flap of box lid into opening for stability

CAUTION: Do not open top all the way back so the weight is supported by the hinges. It will damage the hinges. Prop the top up with supporting brace or use shipping box as shown.

Figure 21.3

Charred Areas in the Back

H. Installing Logo

 

 

 

 

1.

Remove logo from packaging.

 

 

2.

The logo has 2 studs on the back.

Top Log, Left

Top Log

3.

Install the logo on the lower left side of the center

 

Right

 

panel by pressing the 2 studs into the pre-drilled

 

Front Log

 

holes. See Figure 21.4.

 

 

 

Figure 21.2

 

 

NOTE:

 

 

Due to the abrasive nature of a pellet appliance fire, the

 

logs are not covered under warranty. Any placement varia-

Install Logo

tion other than shown here can cause excessive heat and

shall void the appliance warranty.

 

Figure 21.4

 

 

December 16, 2011

7014-179D

Page 21

Image 21
Contents Hot glass will cause burns CB1200M-MBKTesting Lab & Report Number Serial Number Model Mfg Date CB 1200 Pellet Stove007C Table of Contents Listing and Code Approvals Design, Installation & Location Consider- ations Getting StartedAppliance Location Negative Pressure CB 1200 Pellet Stove Locating Your Appliance & ChimneyThermostat Location DraftCB 1200 Pellet Stove Fire Safety Tools And Supplies NeededInspect Appliance & Components and Pre-Burn Check List Appliance Dimensions 3Dimensions and ClearancesCB 1200 Pellet Stove Clearances to Combustibles UL and ULC Alcove InstallationCB 1200 Pellet Stove Hearth Pad Requirements UL and ULC Exception for Horizontal Installations4Vent InformationR Chimney and Exhaust ConnectionVenting Termination Requirements Pipe Selection Chart CB 1200 Pellet Stove Equivalent Feet of PipeExample of 3 Elbow-Rear Vent Termination Calculaton Alcove Venting SystemsStraight Out DegreeCB 1200 Pellet Stove Through The Wall Vertical Internal Typical Installation CB 1200 Pellet Stove Vertical into Existing Class a ChimneyThrough The Wall & Vertical External Alternate Masonry CB 1200 Pellet Stove MasonryMobile Home Rear Installation Floor InstallationAppliance Set-Up Outside Air Kit InstructionsRear Vent and Rear Vent to Top Vent Adapter Installation CB 1200 Pellet Stove Top Vent Adapter InstallationInstalling the Top Vent Adapter See FigureBrick Clip Installation CB 1200 Pellet Stove Optional Brick Set InstallationTop Log, Left Installing LogoRight Front Log Holes. See FigureThermostat Installation CB 1200 Pellet Stove Door InstallationTo install door To adjust latchesFuel Size And Material General Operating Information Operating InstructionsFeed Rate Adjustment Instructions Fire CharacteristicsCB 1200 Pellet Stove Before Your First Fire Starting Your First FireCB 1200 Pellet Stove Ignition Cycles Frequently Asked QuestionsSymptom TroubleshootingPage Page Quick Reference Maintenance Chart Types of FuelFrequency Daily Weekly Monthly Cleaning Ash Pan Cleaning Firepot with Cleaning Rod & Firepot ScraperCleaning Heat Exchanger Chambers & Drop Tube Ash Removal from FireboxCleaning Exhaust Path Cleaning Beneath Heat ExchangerCleaning the Glass Cleaning the HopperPreparing Firebox for Non-Burn Season Frequency Yearly Cleaning the Top Vent AdapterConvection Blower Replacement CB 1200 Pellet Stove High Ash Fuel Content MaintenanceExhaust Blower Replacement Remove existing blower Install new blowerRe-install blower to blower housing Replacing Side Glass Screws Replacing Center GlassReference Materials CB 200 Pellet StoveComponent Function & Location Wiring Harness See .1 below Vacuum SwitchThermostat Snap Disc #1 Convection Blower 145FCB 1200 Pellet Stove Component Locations Part number list on following CB 1200 Pellet Stove Exploded Views#1 Top Assembly CB 1200 Pellet Stove Service Parts & Accessories#2 Baffle Assembly Stocked#10 Firepot Assembly and Associated Parts #11 Door AssemblyStocked at Depot LVGRL-CB12-BK-B 39.1 39.8 #39 Feed Motor AssemblyDescription Comments Part Number Accessories CB 1200 Pellet Stove Warranty Policy December 16 7014-179D Contact Information

CB1200M-MBK specifications

The Quadra-Fire CB1200M-MBK is a remarkable addition to the lineup of high-efficiency wood stoves, designed to provide exceptional heating performance while maintaining a user-friendly interface and aesthetic appeal. Known for its sleek design and modern technology, the CB1200M-MBK stands out as a powerful solution for both environmentally conscious homeowners and those in search of reliable warmth during cold months.

One of the main features of the CB1200M-MBK is its high efficiency rating, often exceeding 75%. This impressive figure is attributed to its innovative combustion technology, which maximizes wood-burning efficiency by promoting complete combustion. This means more heat is generated from less wood, translating to reduced emissions and less frequent refueling. This efficient design not only benefits the environment but also provides a cost-effective heating solution.

The CB1200M-MBK is equipped with a large firebox that can accommodate logs up to 18 inches long, allowing users to enjoy extended burn times and consistent heat output. With a capacity of up to 70,000 BTUs, this stove can efficiently heat spaces ranging from 1,000 to 2,200 square feet, making it suitable for a variety of home sizes.

Another standout feature is its advanced air control system, which provides precise control over combustion levels. This system enables users to adjust the air intake to optimize the fire's intensity, ensuring both comfort and efficiency. Additionally, the stove comes with a built-in ash pan, making cleanup easier and enhancing the overall user experience.

The CB1200M-MBK also showcases an appealing aesthetic, featuring a clean, modern design with a traditional cast-iron appearance. The durable, black finish offers an elegant touch, making it a stylish focal point in any room. Moreover, this model is designed to be compatible with various installation options, including top or rear venting, providing flexibility depending on the specific needs of the home.

Durability is another hallmark of the CB1200M-MBK, constructed with high-quality materials that ensure longevity and performance. The heavy-duty steel construction and quality ceramic glass withstand high temperatures and resist cracking, promising years of reliable use.

In conclusion, the Quadra-Fire CB1200M-MBK is a perfect blend of efficiency, performance, and style. With its impressive BTU output, advanced combustion technology, and user-friendly design, it stands as an ideal choice for homeowners looking to enhance their heating solutions while being mindful of environmental impacts.