Quadra-Fire QV32E-B, QV32EV-B Heater/Blower Assembly Maintenance, Maintenance Task List

Page 20

D. Heater/Blower Assembly Maintenance

•Turn off the circuit breaker/unplug the heater before servicing the heater/blower assembly.

•Allow heater to cool before removing.

•Open the lower grille panel to view the dashboard on the heater (the lower grille may need to be removed).

•Remove the four outer screws. See Figure 10.2.

•Pull dashboard towards you to expose the light compartment (the light tray does not need to be pulled all of the way out of the heater).

•Reach into the back of the left rear corner of the light tray and unplug wire harness from connector. To remove plug, squeeze both sides and pull.

•Remove the hood by pulling it straight out.

•Remove the upper grille panel/door front by lifting it up and out.

•Remove the four outer screws. See Figure 10.2.

•Pull the heater/blower assembly out of heater.

•Slide the heater/blower assembly back into the heater, making sure that the wires do not touch the heater/blower assembly housing.

•Once the front of the heater/blower assembly is fl ush with heater, reinstall the four screws removed earlier.

•Replace the upper grille panel and hood.

•Plug the wire harness back into the connector in the back of the left rear corner of the light tray.

•Slide dashboard back into heater and make sure all wires are inside heater.

•Reinstall the four screws removed earlier.

•Turn on the circuit breaker or plug the heater back into the wall outlet.

Remove

Outer

Screws

Figure 10.2 Installing Heater/Blower Assembly

E. Maintenance Task List

Inspect

 

Maintenance Tasks

Circulation Compartment

1.

Remove any foreign objects.

 

2.

Verify unobstructed air circulation.

20

Quadra-Fire • Village Collection Electric Fireplace • 4030-782 Rev D • 11/05

Page 19 Page 21
Image 20
Page 19 Page 21
Contents QV32E-B QV32EV-B Homeowner Reference Information Listing Label Information/LocationTable of Contents Listing and Code Approvals CertificationNot intended for use as a primary heat source Getting StartedImportant Instructions Tools and Supplies Needed Fire RiskFraming and Clearances Selecting Heater LocationClearances Electrocution RiskFraming CeilingWiring 120VAC Wall Outlet Installation120VAC Hardwire Installation Shock Risk Fire Risk240VAC Hardwire Installation Wall Switch Wiring 12VDCHeater Preparation Secure and Level the HeaterFinishing Checklist FinishingFinishing Material Combustible MaterialMantel CeilingHeater Setup Clean HeaterAccessories Install RefractoryAccess Controls Operating InstructionsManual Controls Function of Manual ControlsHand Held Remote Control Transmitter RCE-QUAD-B Optional Canadian Equipment Requirements Wall Switch ControlFCC Requirements Issues Possible Causes Solutions TroubleshootingTroubleshooting Guide Maintenance and Service Cleaning the Firebox and Control Compart- mentCleaning the Back Acrylic Panel Replacing the Light BulbsHeater/Blower Assembly Maintenance Maintenance Task ListHeater Dimensions Reference MaterialsOptional Components FrontsTrim Kits SurroundsService Parts Village Collection Service Parts# Description of Part QV32E-B Series QtyThis page intentionally left blank Warranty Limited WarrantyContact Information Hearth & Home Technologies Inc North Highway Colville, WA

QV32E-B, QV32EV-B specifications

The Quadra-Fire QV32EV-B and QV32E-B are high-efficiency gas stoves that combine modern aesthetics with cutting-edge technology. Designed for homeowners seeking warmth and style, these models stand out for their superb heat output and reliable performance.

One of the main features of the Quadra-Fire QV32EV-B and QV32E-B is their advanced heating capability. The stoves are capable of producing up to 32,000 BTUs, efficiently heating spaces while maintaining a clean, environmentally conscious burn. This energy-efficient performance makes them ideal for residential heating, offering consistent warmth during colder months.

Both models employ a unique, patented Easy Clean system, which simplifies maintenance by making it easier to access the stove's components. This feature ensures that the stove remains in optimal condition, allowing homeowners more time to enjoy the warm ambiance it creates rather than worrying about upkeep.

The QV32EV-B and QV32E-B are characterized by their sleek, contemporary design, featuring a large viewing window that provides an unobstructed view of the flickering flames, enhancing any room's atmosphere. Additionally, they can be customized with a variety of finishes and decorative choices, allowing users to perfectly match their decor.

These models come equipped with the Quadra-Fire Ember-Fire technology, which maximizes the visual appeal of the flames, creating a realistic, captivating fire experience. This technology not only enhances aesthetic pleasure but also improves the efficiency of the gas burn, contributing to the overall effectiveness of the unit.

The stoves feature a state-of-the-art electronic ignition system for ease of use. This enables users to ignite their stove with the push of a button, eliminating the need for fire starters or matches. The adjustable thermostat allows for precise temperature control, providing comfort tailored to individual preferences.

Safety is paramount in the design of the QV32EV-B and QV32E-B, as they incorporate features like a safety shut-off system that automatically turns off the stove in case of malfunction. The sturdy construction and high-quality materials ensure long-lasting durability, making these stoves a worthwhile investment.

In summary, the Quadra-Fire QV32EV-B and QV32E-B offer a blend of efficiency, style, and user-friendly technology, making them an exceptional choice for anyone looking to enhance their home's heating system. With their combination of modern design and reliable performance, they are sure to be a centerpiece in any living space.
Top Page Image Contents