Basic functions
Playing a Disc
Before Play
-Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV remote control.
-If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
After plugging in the player, the first time you press the DVD POWER button, this screen comes up: If you want to select a language, press the π/† button, and then press the ENTER button. (This screen will only appear when you plug in the player for the first time.)If the language for the startup screen is not set, the
Using the Search and Skip Functions
During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection.
Searching through a Chapter or Track
During play, press the SEARCH (k or K) button on the remote control for more than 1 second.
|
|
| Note |
DVD | 2X, 4X, 8X, 16X, 32X |
| |
| - The speed marked in this function may be different from the | ||
CD | 2X, 4X, 8X, 16X, 32X |
| |
| actual playback speed. | ||
VCD | 4X, 8X |
| |
| - No sound is hearing during search mode (Except CD). | ||
|
|
|
|
Skipping Tracks
During play, press the SKIP (k or K) button.
-When playing a DVD, if you press the SKIP (K) button, it moves to the next chapter. If you press the SKIP (k) button, it moves to the beginning of the chapter. One more press makes it move to the beginning of the previous chapter.
-When playing a VCD, if you press the SKIP (K) button, it moves to the next track. If you press the SKIP (k) button, it moves to the beginning of the track. One more press makes it move to the beginning of the previous track.
-If a track exceeds 15 minutes when playing a VCD and you press the K button, it moves forward 5 minutes. If you press the k button, it moves to the beginning of the track. One more press makes it move to the beginning of the previous track.
6 |
Using the Display Function
When Playing a DVD/VCD/MPEG4
1.During play, press the TOOLS button on the remote control.
2.Press the π/† buttons to select the desired item.
3.Press the √/® buttons to make the desired setup.
4.To make the screen disappear, press the TOOLS button again.
The functions when using the Display function are listed in the table below.
To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified.
Most DVD discs are recorded in chapters so that you can quickly find a specific passage.
Allows playback of the film from a desired time. You must enter the starting time as a refer- ence.The time search function does not operate on some disc.
Refers to the language of the film soundtrack. In the example, the soundtrack is played in English 5.1CH. A DVD disc can have up to eight different soundtracks.
Refers to the subtitle languages available in the disc. You will be able to choose the subtitle lan- guages or, if you prefer, turn them off from the screen. A DVD disc can have up to 32 different sub- titles.
EZ | User will be able to choose |
Press enter to activate the Zoom function.
To access the desired Angle function. Some DVD disc are have more than one recorded angle.
Using the Disc and Title Menu
During the playback of a DVD disc, press the DISC MENU/TITLE MENU button on the remote control.
Note
-Depending on a disc, the Disc Menu/Title Menu may not work.
-You can also use the Disc Menu, using the DISC MENU button on the remote control.
-Title Menu will only be displayed if there are at least two titles in the disc.
Repeat Play
Repeat the current track, chapter, title, a chosen section
When playing a DVD/VCD
1.Press the REPEAT button on the remote control. Repeat screen appears.
2.Press the REPEAT or π/† button to change playback mode. DVD repeats play by chapter or title.
-Off.
-Title : repeats the title that is playing.
-Chapter : repeats the chapter that is playing.
-Repeat