Samsung RF26NEPN1/SML, RF26DEPN1/SML manual Adjusting ThE Doors, ASSEMblE ThE Freezer Drawer

ASSEMblE ThE FREEZER DRAWER

1. Pull out the rails to the full length on each side of the cabinet evenly.

2. Hang the freezer door front onto open slots on the sides.SlotSlot

3. Tighten four 10mm hex-head screws completely.

01 SETTING UP

4. With the drawer pulled out fully, insert the lower basket ( 6 ) into the rail system.

6

5. Hook the ends of the tilting pocket ( 7 ) into both brackets ( 8 ), and push down until they lock into place.

7

8

Be careful not to missplace the parts of refrigerator.

CAUTION

ADJUSTING ThE DOORS

Now that the doors are back on the Refrigerator, you want to make sure the Refrigerator is level so that you can make final adjustments. If the Refrigerator is not level, it will not be possible to get the doors perfectly even.

Setting Up _11

DA99-01623N-EN.indd 11 2011.4.27 10:43:53 AM