Samsung LV32F390FIXXRU manual Broadcasting → Auto Tuning, Mode Not Supported

Other Information

Issues	Solutions and Explanations
Trouble Powering On	Before you turn the product on, find the blue light in the bottom of the right position
	product. Press the power on button on the product or remote and the light should
	blink about 5 times before the product turns on.
	If you find that you are having trouble powering on your Samsung television, there
	are a number of things to check before making a call to the service department.
	●● If you happen to be using the product as a monitor and the stand-by light only
	blinks for a few seconds when you press the power button, your PC is in sleep
	mode. To take your PC out of sleep mode, press a key on your keyboard or move
	the mouse. Then try turning your product on.
	If you’re sure your power cord, remote control, and PC are functioning properly, you
	may be having a cable issue. If you have a cable or satellite box, your product may
	appear to be off because the cable or satellite box is not outputting a signal. To test
	the signal output of your cable or satellite box, press the guide or info button on the
	cable or satellite box remote control. If the screen displays the guide or info data, the
	problem is caused by the box.
Cannot Find a Channel	Re-run Setup (Go to MENU → System → Setup) or run Auto Tuning. (Go to MENU →
	Broadcasting → Auto Tuning).

Issues

Solutions and Explanations

PC Connection

A Mode Not Supported	Set your PC’s output resolution so it matches a resolution supported by the product.
message appears.
“PC” is always shown on the	This is normal. “PC” is always shown in the source list, regardless of whether a PC is
source list, even if a PC is not	connected.
connected.
The video is OK but there is	If you are using an HDMI connection, check the audio output setting on your PC.
no audio.
Picture	First, perform the Picture Test and to see if your product is properly displaying the
	test image (go to MENU → Support → Self Diagnosis → Picture Test).
	If the test image is properly displayed, the poor picture may be caused by the source
	or signal.
The product image does not	Store displays are all tuned to digital, HD (high definition) channels.
look as good as it did in the	If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI
store.	or Component cables to deliver HD (high definition) picture quality.
	"" Many HD channels are up scaled from SD (Standard Definition) contents. Look
	for a channel that is broadcasting true HD content.
	—— Cable/Satellite subscribers: Try HD channels from the channel line up.
	—— Terrestrial/Cable Aerial connection: Try HD channels after performing an
	Auto Tuning.
	Adjust the Cable/Sat box video output resolution to 1080i or 720p.

English - 73