Setting down, transportation and storage
Park-System
The
^Insert the lower clip of the floor brush into the slot on the end of the vacuum from above (see illustration).
Turning on and off with the
Park-System 
Parking the floor brush while vacuum- ing automatically turns off the vacuum. Lifting the floor brush out of the Park- System turns the vacuum back on.
If your vacuum cleaner is equipped with +/- suction power selector controls you can deactivate or activate the
^Turn off the vacuum using the On/Off button.
^Hold the + and - buttons simulta- neously and turn the vacuum on us- ing the On/Off button.
Transportation and storage
^Stand the vacuum cleaner vertically.
^Insert both clips of the floor brush into the two point holder on the side of the vacuum.
This makes the vacuum cleaner easier to carry or store.
27 |