Panasonic PT-DW6300, PT-D5000 manual Serial terminal, Connection, Pin assignments and signal names

Technical Information

Serial terminal

The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connecter.

Connection

Single projector

Computer	Connecting terminals on projector
	D-Sub 9-pin (female)

	D-Sub 9-pin (male)
Communication cable (straight)

Multiple projectors

Connecting terminals on projector 1	Connecting terminals on projector 2
D-Sub 9-pin (female)	D-Sub 9-pin (female)

Computer

D-Sub 9-pin (male) D-Sub 9-pin (male)

Communication cable (straight)

Pin assignments and signal names

Pin		Female		Male
No.	Signal name	Contents	Signal name	Contents
1		NC		NC
2	TXD	Transmitted data	RXD	Received data
3	RXD	Received data	TXD	Transmitted data
4		Connected internally		Connected internally
5	GND	Earth	GND	Earth
6		NC		NC
7	CTS	Connected internally	RTS	Connected internally
8	RTS		CTS
9		NC		NC

Communication settings

See “RS-232C” on page 29.

Signal level	RS-232C	Character length	8 bits
Sync. method	Asynchronous	Stop bit	1 bit
Baud rate	9 600 bps	X parameter	None
Parity	None	S parameter	None

Appendix

ENGLISH - 45