Panasonic PT-DW6300 White Gain, Noise Reduction, System Daylight View, Sharpness, System Selector

PICTURE menu

WHITE GAIN

You can adjust the brightness of white area of the image. Call up the bar scale by pressing I, H or the ENTER button, and press I H to adjust the value.

IMore natural white

H Whiter

Setting range: 0 to +10

NOISE REDUCTION

You can select the automatic noise reduction system strength. Press I H to cycle through the options.

OFF Deactive

1Low

2Middle

3High

SYSTEM DAYLIGHT VIEW

You can keep the projected image bright and vivid even in well- lit rooms where the ambient light sources cannot be controlled, such as when a door opens or when window coverings fail to block out sunlight. Press I H to cycle through the options.

OFF Deactive

1Low

2Middle

3High

SHARPNESS

You can adjust the sharpness of the projected image. Call up the bar scale by pressing I, H or the ENTER button, and press I H to adjust the value.

ILess sharp

HMore sharp

Setting range: 0 to +15

AI

You can switch on/off the auto iris control system. Press I H to switch between ON or OFF.

ON	Active
OFF	Deactive

SYSTEM SELECTOR

When the input signal is changed, the projector detects the colour system and selects the matched setting automatically, or you can select manually. Press I H to cycle through the options.

VIDEO/S-VIDEO terminal

AUTO HNTSC HNTSC 4.43 HPAL HPAL-M HPAL-N HSECAM HPAL60

•AUTO is usually recommended.

•Selecting options of AUTO are NTSC/NTSC 4.43/PAL/PAL- M/PAL-N/SECAM/PAL60.

RGB 1 IN/RGB 2 IN terminal

480i/576i/576p signals	RGB HYCBCR
VGA60/480p signals:	VGA60 H480p H480pRGB
Other signals	RGB HYPBPR

•See "List of compatible signals" in the Operating Instructions that provided with the projector.

SDI terminal (PT-DZ6710 only)

AUTO H 1080⁄60i H 1035⁄60i H 720⁄60p H 1080⁄24p H 1080⁄50i

H1080⁄30p H 1080⁄25p H 1080⁄24sF H 720⁄50p H 480i H 576i

Settings

ENGLISH - 17