Panasonic PT-DW6300, PT-D5000 manual Network menu, Network Setup, Network Control, Network Status

NETWORK menu

Remote control

See “Navigating through the menu” on page 15.

See “Main menu and Sub-menu” on page 12.

NETWORK SETUP

Make the initial network settings before using the network connection.

1.Select the required item to change.

2.Press the ENTER button.

3.Use F G I H to change the settings.

4.Select STORE and press the ENTER button.

The confirmation screen will be displayed. Select OK and press the ENTER button.

HOST NAME	Change as needed when using a
	DHCP server.
	ON: When using DHCP server,
	automatically acquire an IP
DHCP	ADDRESS.
	OFF: IP ADDRESS need to be
	entered manually.
	Enter correct IP ADDRESS numbers.
IP ADDRESS	When DHCP is ON, automatically
	filled.
	Enter correct SUBNET MASK
SUBNET MASK	numbers. When DHCP is ON,
	unnecessary to fill.
	Enter correct DEFAULT GATEWAY
DEFAULT GATEWAY	numbers. When DHCP is ON,
	unnecessary to fill.
STORE	Save the above settings.

NOTE:

•Make sure the DHCP server is ready to use.

•For details of IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY, ask the network administrator.

NETWORK CONTROL

You can switch on/off the projector network controlling method.

1.Select the required item to change.

2.Press the ENTER button.

3.Use I H to change the settings.

4.Select STORE and press the ENTER button.

The confirmation screen will be displayed. Select OK and press the ENTER button.

WEB CONTROL	For when controlling from a computer
	with the web browser.
PJLink CONTROL	For when controlling from a computer
	with the PJLinkTM protocol.
COMMAND CONTROL*1	For when controlling from a computer
	via SERIAL terminal.
COMMAND PORT	Enter the command port number for
	COMMAND CONTROL.
STORE	Save the above settings.

*1. If settings have been made without an administrator password of the web browser control, add 2-byte “00” instead of STX, and a line-feed code (0Dh) instead of ETX.

If settings have been made with an administrator password, of the web browser control, add a 32-byte hash value and “00” instead of STX and a line-feed code (0Dh) instead of ETX.

The hash value is created by MD5 combining “admin1:”, password, “:” and random numbers. The random numbers are 8-byte values sent from the projector when connecting.

NETWORK STATUS

You can display the current network status of the projector. Press the ENTER button to display.

DHCP

IP ADDRESS

SUBNET MASK

DEFAULT GATEWAY

DNS1

DNS2

MAC ADDRESS

Settings

ENGLISH - 37