Maintenance

DANGER To avoid electrical shock: Never make measurement on a circuit in which voltage over 600V AC/DC exists.

Do not use with the Battery Cover removed. Keep ﬁngers behind the guards and away from test lead tips during measurements.

AC/DC Voltage

The Electrical Tester automatically identiﬁes AC or DC sources and indicates the type of voltage on the LCD screen using AC or DC .

1.Set the Slide Switch to position (Cat. No. 2213-20 only).

2.Connect the red test lead to the VΩ terminal and the black test lead to the COM terminal.

3.Connect the test leads to the circuit under test.

4.If voltage is present, the measurement will be displayed on the screen. If measured voltage is over AC/DC 35 V, the Indicator LED will be lit RED and the buzzer will sound with steady, intermittent beeps (B_B_B).

NOTE: When DC voltage is displayed, a reversed connection (red test lead to the negative (-) side and black test leads to the positive (+) side of

the circuit) is indicatedġas a negative value.

CAUTION Readings may ﬂuctuate or be inﬂuenced in noisy environment.

DANGER To reduce the risk of electric shock for Continuity or Resistance measurements, never use the Tester on an energized circuit. Make sure a capacitor is fully discharged before touching or attempting to make a measurement.

Do not use with the Battery Cover removed.

Continuity

If voltage is not present, the tester will automati-

cally switch to continuity test mode and provide
test results indicating whether
continuity is present or not.
1. Set the Slide Switch to
position (Cat. No. 2213-20
only).
2. Connect the red test lead
to the VΩ terminal and the
black test lead to the COM
terminal.
Short-circuit the tips of test
leads to make the indication
zero. A buzzer will sound.
3. Connect the test leads to
both end of the conductor
under test. If the resistance
under test is 20 kΩ or less,
the	Indicator LED will
be lit YELLOW and buzzer
will sound with a continuous
beep.

CAUTION After shorting the test leads, the displayed value may not be zero due to the resistance of test leads themselves.

Resistance (Cat. No. 2213-20 only)

1. Set the Slide Switch to position.

2. Connect the red test lead to the VΩ terminal and the black test lead to the COM terminal. Conﬁrm “OL” is indicated on the display, and then short-circuit the tips of test leads to make the indication zero.

3. Connect the test leads to the both ends of the resistor under test.

4. The reading is displayed.

WARNING To reduce the risk of injury, always remove the batteries from the tool before performing any maintenance. Never disassemble the tool. Contact a MILWAUKEE service facility for ALL repairs.

Maintaining Tool

Keep your tool in good repair by adopting a regular maintenance program. After six months to one year, depending on use, return the tool to a MILWAUKEE service facility for repairs.

If the tool does not start or operate at full power with new batteries, clean the contacts on the battery door. If the tool still does not work properly, return the tool to a MILWAUKEE service facility for repairs.

WARNING To reduce the risk of per- sonal injury and damage, never immerse your tool in liquid or allow a liquid to ﬂow inside it.

Cleaning

Clean dust and debris from tool. Keep tool clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean the tool since certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and house- hold detergents containing ammonia. Never use ﬂammable or combustible solvents around tools.

Repairs

For repairs, return the tool to the nearest service center listed on the back cover of this operator's manual.

ACCESSORIES

WARNING Always remove batteries before changing or removing accessories. Only use accessories speciﬁcally recommended for this tool. Others may be hazardous.

For a complete listing of accessories refer to your MILWAUKEE Electric Tool catalog or go online to www.milwaukeetool.com. To obtain a catalog, contact your local distributor or service center.

FIVE YEAR TOOL LIMITED

WARRANTY

MILWAUKEE Test & Measurement Product (including bare tool, M12™ battery pack(s) and battery charger) is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace any part on this product which, after examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of ﬁve (5) years* after the date of purchase. Return of the Test & Measurement tool to the nearest Milwaukee Electric Tool Corporation

-factory Service Center, freight prepaid and insured is required. A copy of the proof of purchase should be included with the return product. This warranty does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.

* See separate & distinct CORDLESS BATTERY PACK LIMITED WARRANTY statement for the warranty period of the LITHIUM-ION battery pack that ships with Test & Measurement Product. *Alkaline battery that ships with Test & Measurement Product is separately warranted by the alkaline battery manufacturer.

*The warranty period for a Voltage Detector with Work Light – 2201 20, Voltage Detector with LED – 2202-20 or M12™ 2-Beam Plumb Laser – 2230 20 is one (1) year from the date of purchase.

Warranty Registration is not necessary to obtain the ap- plicable warranty on MILWAUKEE product. The manu- facturing date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNI- TIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT IN- CLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WRITTEN OR ORAL. TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICU- LAR USE OR PURPOSE; TO THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WARRANTIES ARE LIMITED TO THE DURA- TION OF THE APPLICABLE EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

This warranty applies to product sold in the U.S.A. and

7Canada only.

2212-20 specifications

The Milwaukee 2212-20 is a powerful and versatile tool designed to meet the demands of both professional tradespeople and DIY enthusiasts. This heavy-duty tool is part of Milwaukee's extensive line of high-performance power tools that are engineered to provide exceptional reliability and functionality.

One of the standout features of the Milwaukee 2212-20 is its robust motor, which delivers impressive speed and torque, enabling users to tackle a wide variety of cutting tasks with ease. This tool is specifically designed for cutting applications in wood, metal, and plastic, making it a highly adaptable choice for diverse job sites. The advanced motor technology ensures that the tool maintains consistent performance, even under heavy load conditions.

Additionally, the Milwaukee 2212-20 is equipped with impressive blade options that allow for precise cuts and enhanced versatility. Users can easily switch between blades depending on the material being worked on, ensuring optimal performance at all times. The tool features an adjustable speed setting, giving users the ability to match the tool's performance to the specific requirements of their project, whether they're making fine cuts or cutting through tougher materials.

Ergonomics play a key role in the design of the Milwaukee 2212-20. The tool features a comfortable grip that reduces user fatigue during extended use, allowing for longer periods of operation without discomfort. The balanced design of the tool also enhances control, ensuring that users can maneuver it with accuracy, which is especially vital for intricate tasks.

The Milwaukee 2212-20 incorporates advanced safety features, including blade guards and an electronic brake that stops the blade quickly when the trigger is released. This feature not only ensures user safety but also extends the life of the blade by preventing unnecessary wear.

In summary, the Milwaukee 2212-20 is a reliable and efficient cutting tool, characterized by its powerful motor, adjustable speed settings, and ergonomic design. It is an ideal choice for professionals in construction, woodworking, and metalworking, as well as hobbyists looking for a versatile tool to add to their collection. With its combination of features and built-in safety technologies, the Milwaukee 2212-20 represents a significant asset for anyone looking to enhance their cutting capabilities.