Napoleon Fireplaces BGD36NTR, BGD36PTR manual Using Flexible Vent Components

Page 17
FIGURE 30

17

USING FLEXIBLE VENT COMPONENTS

Use only approved aluminum flexible liner kits marked:

"Wolf Steel Approved Venting" as identified by the stamp only on the 7” outer liner.

For safe and proper operation of the fireplace, follow the venting instructions exactly.

HORIZONTAL AIR TERMINAL INSTALLATION

1.Cut or frame a hole in an exterior wall with a minimum round or square opening of 10½ inches. Secure the firestop spacer over the opening to the interior wall.

2.Stretch the 4" diameter aluminum flexible liner to the required length taking into account the additional length needed for the finished wall surface. Slip the liner a mini- mum of 2" over the inner sleeve of the air terminal and secure with 3 #8 screws. Apply a heavy bead of the high temperature sealant.

3.Using the 7" diameter flexible aluminum liner, slide over the outer combustion air sleeve of the air terminal and secure with 3 #8 screws. Seal as before.

4.Insert the liners through the firestop maintaining the required clearance to combustibles. Holding the air termi- nal (lettering in an upright, readable position), secure to the exterior wall and make weather tight by sealing with caulking (not supplied).

5.Apply a heavy bead of the high temperature sealant to the inside of the 4" liner approximately 1" from the end. Slip the liner a minimum of 2" over the fireplace vent collar and secure with 3 #8 screws.

6.Using the 7" diameter flexible aluminium liner, apply sealant, slide a minimum of 2" over the fireplace combus- tion air collar and secure with 3 #8 screws.

7.If more liner needs to be used to reach the fireplace, couple them together as illustrated. The vent system must be supported approximately every 3 feet for both vertical and horizontal runs. Use noncombustible strapping to maintain the minimum 1" clearance to combustibles.

VERTICAL AIR TERMINAL INSTALLATION

FIGURE 27

The air terminal mounting plate may be recessed into the exterior wall or siding by 1½", the depth of the return flange.

FIGURE 28

1. Fasten the roof sup-

FIGURE 29

port to the roof using the

 

 

screws provided. The

 

roof support is optional.

 

In this case the venting

 

is to be adequately sup-

 

ported using either an al-

 

ternate method suitable

 

to the authority having ju-

 

risdiction or the optional

 

roof support.

2.Stretch the 4" diameter aluminium flexible liner to the required length. Slip the liner a minimum of 2" over the inner sleeve of the air terminal

and secure with 3 #8 screws. Seal using a heavy bead of the high temperature sealant.

3.Repeat using 7" diameter aluminium flexible liner.

4.Thread the air terminal pipe assembly down through the roof.

The air terminal must be located vertically and plumb. Attach the air terminal assembly to the roof support, ensuring that a mini-

mum 16" of air terminal will penetrate the roof when fas- tened.

DO NOT CLAMP THE FLEXIBLE ALUMINIUM LINER.

W415-0210 / E / 06.25.03

Image 17
Contents Direct Vent Millivolt System Table of Contents Napoleon GAS Fireplace Presidents Lifetime Limited Warranty General Information General InstructionsCare of GLASS, and Plated Parts GD36Venting Lengths GD36 Specifications BGD36 SpecificationsVenting AIR Terminal Installations Periscope Termination Corner Termination Typical Vent InstallationsSpecial Vent Installations Venting Application Flow Chart Elbow Vent Length Values TOP Exit / Horizontal TerminationDefinitions H2 H3 Formula 1 HT VT Formula 2 HT + VT 40 feet Rear Exit / Horizontal TerminationFormula 1 HT 3.5VT Formula 2 HT + VT 24.75 feet TOP or Rear Exit Vertical Termination Formula 1 HT 3VT Formula 2 HT + VT 40 feet Example For Safe and Proper Operation of the Fireplace PRE-INSTALLATION PreparationBaffle Horizontal Installation Installation Wall and Ceiling ProtectionVertical Installation Follow the Venting Instructions ExactlyDo not Clamp the Flexible Aluminium Liner Using Flexible Vent ComponentsFireplace Vent Connection Using Rigid Vent ComponentsModel GD36NTR Vertical Terminal only Vertical Venting InstallationRestricting Vertical Vents Mobile Home Installation GAS InstallationWire Size MAX. Length FramingBGD36 Mantle Clearances BGD36 Nailing TAB InstallationFinishing Door Removal & InstallationGvfl Louvre Installation L36 Louvre Installation Logo Placement LOG PlacementCharcoal Embers Vermiculite Model GD36 onlyBe electrically con Optional Blower InstallationGD36 Thermostatic Sensor Control Optional FAN InstallationFor Your Safety Read Before Lighting Operation / MaintenanceMaintenance AdjustmentsPilot Burner Adjustment Venturi AdjustmentComponents Common to Both Units ReplacementsW415-0210 / E Symptom Problem Test Solution Trouble Shooting GuideModel GD36 only Do not Clean Glass When HOT

BGD36PTR, BGD36NTR, GD36PTR, GD36NTR specifications

Napoleon Fireplaces is a brand renowned for its commitment to quality, innovation, and style in home heating solutions. Among their exceptional offerings are the GD36NTR, GD36PTR, BGD36NTR, and BGD36PTR models, which epitomize modern gas fireplace design with an array of features, technologies, and characteristics.

The GD36NTR (Natural Gas) and GD36PTR (Propane) models are designed to provide warmth and ambiance with elegance. These fireplaces boast a compact yet stylish design that fits seamlessly into any living space. The impressive heat output ranges up to 30,000 BTUs, ensuring a cozy environment even in the coldest months. The included large glass viewing area enhances the aesthetics of the fireplace, allowing for an unobstructed view of the mesmerizing flames.

Equipped with Napoleon’s advanced heat radiating system, the GD36 series enhances warmth distribution, making it efficient and effective. The innovative electronic ignition ensures that lighting the fireplace is easy and reliable, offering both convenience and safety.

In contrast, the BGD36 series, consisting of BGD36NTR and BGD36PTR, brings a different approach with its built-in design suited for new constructions and renovations. These models emphasize versatility and adaptability, fitting into a variety of settings. The BGD36 models similarly deliver aesthetic appeal with their expansive glass front, and they feature a powerful heat output of up to 30,000 BTUs.

Both the GD36 and BGD36 series integrate Napoleon’s patented PHAZER® Log Set that mimics the look of real wood logs, ensuring a lifelike flame experience. The adjustable flame height feature allows users to customize the ambiance according to their moods, ranging from a gentle glow to full, roaring flames.

Another remarkable feature is the multi-function remote control that provides fingertip access to all fireplace functions, enhancing user experience. Complementing these features is the inclusion of a safety screen, which ensures that families can enjoy their fires with peace of mind.

Both series highlight energy efficiency, complying with strict environmental regulations while providing the coziness expected from a traditional fireplace. With their stylish designs, innovative technologies, and commitment to safety and efficiency, the Napoleon Fireplaces GD36NTR, GD36PTR, BGD36NTR, and BGD36PTR make the perfect addition to any home, blending warmth and modern sophistication.