Napoleon Fireplaces GD36PTR, BGD36NTR manual Optional Blower Installation, Be electrically con

Page 25
FIGURE 53

25

OPTIONAL BLOWER INSTALLATION

b

 

d

I N S T A L L A -

l

 

re

a

 

 

 

c

 

 

TION TO BE DONE

k

 

 

 

 

 

 

 

 

BY A QUALIFIED IN-

 

white

 

STALLER and must

 

 

be electrically con-

 

 

 

B

A

C

 

FIGURE 48

nected and grounded in accordance with lo- cal codes. In the ab- sence of local codes, use the current CSA

C22.1 CANADIAN ELEC-

FIGURE 50

FIGURE 51

Attach the connectors

FIGURE 52

from the black and white

wires to the thermodisc

THERMODISC

TRICAL CODE in Canada or the ANSI/NFPA 70 NATIONAL ELECTRICAL

CODE in the United States

If the fireplace was not previously equipped with a blower: route a grounded 2-wire, 60hz power cable to the receptacle / junction box. At this point, it must be strain relieved and insulated.

and

secure

the

 

thermodisc bracket to the

 

securing stud at the bot-

RECEPTACLE /

tom left of the unit using

JUNCTION BOX

a lock washer and wing

 

nut.

Ensure that

the

 

The three slots on the

blower mounting bracket allow ease of

adjustment when attaching the blower. For a quiet running blower, do not allow the assembly to sit on the firebox base.

ELONGATED

SLOTS

FIGURE 49

thermodisc touches the

GROUND

SCREW

firebox wall.

 

Attach the connectors from the black and red wires to the blower.

Attach and secure the variable speed switch using the nut provided. Plug the harness cord into the receptacle.

The wire harness pro- vided in this kit is a uni-

Slide the vibration reducing pad (A) into the clip (C) and up against the threaded stud (B) at the other end. The blower must be able to be positioned entirely onto the pad.

To ease installation of the blower, remove the hinge screen and valve control door (lower louvres) from the base of the fireplace.

Tilt the blower onto its side. Slide it past the controls and into the clip (C). Secure to the threaded stud using the lock washer and wing nut provided. Ensure that the blower does not touch the fireplace base or the firebox.

versal harness. When in-

stalled, ensure that any excess wire is con-

tained, preventing it from making contact with moving or hot ob- jects.

Because the blower is thermally activated, when turned on, it will automatically start approximately 10 minutes after lighting the fireplace and will run for approximately 30-45 minutes after the fire- place has been turned off. Use of the fan increases the output of heat.

Drywall dust will penetrate into the blower bear- ings, causing irreparable damage. Care must be taken to prevent drywall dust from coming into contact with the blower or its compartment. Any damage resulting from this condition is not cov- ered by the warranty policy.

W415-0210 / E / 06.25.03

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Direct Vent Millivolt System Table of Contents Napoleon GAS Fireplace Presidents Lifetime Limited Warranty General Information General InstructionsCare of GLASS, and Plated Parts GD36Venting GD36 Specifications BGD36 SpecificationsVenting Lengths AIR Terminal Installations Special Vent Installations Typical Vent InstallationsPeriscope Termination Corner Termination Venting Application Flow Chart Definitions TOP Exit / Horizontal TerminationElbow Vent Length Values H2 H3 Formula 1 HT VT Formula 2 HT + VT 40 feet Rear Exit / Horizontal TerminationFormula 1 HT 3.5VT Formula 2 HT + VT 24.75 feet TOP or Rear Exit Vertical Termination Formula 1 HT 3VT Formula 2 HT + VT 40 feet Example Baffle PRE-INSTALLATION PreparationFor Safe and Proper Operation of the Fireplace Horizontal Installation Installation Wall and Ceiling ProtectionVertical Installation Follow the Venting Instructions ExactlyDo not Clamp the Flexible Aluminium Liner Using Flexible Vent ComponentsFireplace Vent Connection Using Rigid Vent ComponentsRestricting Vertical Vents Vertical Venting InstallationModel GD36NTR Vertical Terminal only Mobile Home Installation GAS InstallationWire Size MAX. Length FramingBGD36 Mantle Clearances BGD36 Nailing TAB InstallationGvfl Louvre Installation L36 Louvre Installation Door Removal & InstallationFinishing Logo Placement LOG PlacementCharcoal Embers Vermiculite Model GD36 onlyBe electrically con Optional Blower InstallationGD36 Thermostatic Sensor Control Optional FAN InstallationFor Your Safety Read Before Lighting Operation / MaintenanceMaintenance AdjustmentsPilot Burner Adjustment Venturi AdjustmentComponents Common to Both Units ReplacementsW415-0210 / E Symptom Problem Test Solution Trouble Shooting GuideModel GD36 only Do not Clean Glass When HOT

BGD36PTR, BGD36NTR, GD36PTR, GD36NTR specifications

Napoleon Fireplaces is a brand renowned for its commitment to quality, innovation, and style in home heating solutions. Among their exceptional offerings are the GD36NTR, GD36PTR, BGD36NTR, and BGD36PTR models, which epitomize modern gas fireplace design with an array of features, technologies, and characteristics.

The GD36NTR (Natural Gas) and GD36PTR (Propane) models are designed to provide warmth and ambiance with elegance. These fireplaces boast a compact yet stylish design that fits seamlessly into any living space. The impressive heat output ranges up to 30,000 BTUs, ensuring a cozy environment even in the coldest months. The included large glass viewing area enhances the aesthetics of the fireplace, allowing for an unobstructed view of the mesmerizing flames.

Equipped with Napoleon’s advanced heat radiating system, the GD36 series enhances warmth distribution, making it efficient and effective. The innovative electronic ignition ensures that lighting the fireplace is easy and reliable, offering both convenience and safety.

In contrast, the BGD36 series, consisting of BGD36NTR and BGD36PTR, brings a different approach with its built-in design suited for new constructions and renovations. These models emphasize versatility and adaptability, fitting into a variety of settings. The BGD36 models similarly deliver aesthetic appeal with their expansive glass front, and they feature a powerful heat output of up to 30,000 BTUs.

Both the GD36 and BGD36 series integrate Napoleon’s patented PHAZER® Log Set that mimics the look of real wood logs, ensuring a lifelike flame experience. The adjustable flame height feature allows users to customize the ambiance according to their moods, ranging from a gentle glow to full, roaring flames.

Another remarkable feature is the multi-function remote control that provides fingertip access to all fireplace functions, enhancing user experience. Complementing these features is the inclusion of a safety screen, which ensures that families can enjoy their fires with peace of mind.

Both series highlight energy efficiency, complying with strict environmental regulations while providing the coziness expected from a traditional fireplace. With their stylish designs, innovative technologies, and commitment to safety and efficiency, the Napoleon Fireplaces GD36NTR, GD36PTR, BGD36NTR, and BGD36PTR make the perfect addition to any home, blending warmth and modern sophistication.
Top Page Image Contents