Vertical Venting Installation

Before attaching elbows to the collars on the back of the fireplace, 1½" will need to be trimmed off the 4" collar.

REAR VENT APPLICATION: Attach 4" and 7" elbows to the fireplace. Secure with 3 screws and seal the joints and screw heads using high temperature sealant. Proceed to step 1 below.

TOP VENT APPLICATION:

1.Move the fireplace into position.

2.Fasten the roof support to the roof using the screws provided. FIGURE 30. The roof support is optional. In this case the venting is to be adequately supported using ei- ther an alternate method suitable to the authority having jurisdiction or the optional roof support.

3.Apply high temperature sealant to the outer edge of the inner sleeve of the air terminal. Slip a 4" diameter coupler a minimum of 2" over the sleeve and secure using 3 screws.

6. Remove nails from the shingles, above and to the

sides of the chimney. Place the flashing over the air termi-

nal and slide it underneath the sides and upper edge of

the shingles. Ensure that the air terminal is properly

centered within the flashing, giving a 3/4" margin all around.

Fasten to the roof. Do NOT nail through the lower portion of

the flashing. Make weather-tight by sealing with caulking.

Where possible, cover the sides and top edges of the flash-

ing with roofing material.

7. Apply a heavy bead of waterproof caulking 2 inches

above the flashing. Slide the storm collar around the air

terminal and down to the caulking. Tighten to ensure that a

weather-tight seal between the air terminal and the collar

is achieved. Attach the other storm collar centered between

the air intake and air exhaust slots onto the air terminal.

Tighten securely. Attach the rain cap.

8. Continue adding rigid venting sections, sealing and

securing as above. Attach a 4" collapsed telescopic pipe

to the last section of rigid piping. Secure with screws and

seal. Repeat using a 7" telescopic pipe.

9. REAR VENT APPLICATION: Run a bead of high tem-

4. Apply high temperature seal- ant to the outer edge of the of the outside sleeve of the air terminal. Slip a 7" diameter coupler over the sleeve and secure as before. Trim the 7" coupler even with the 4" cou- pler end.

5. Thread the air terminal pipe assembly down through the roof support and attach, ensuring that a minimum 16" of air terminal will penetrate the roof when fastened.

If the attic space is tight, we rec- ommend threading the Wolf Steel vent pipe collar or equiva- lent loosely onto the air terminal assembly as it is passed through the attic. The air terminal must be located vertically and plumb.

FIGURE 35

VENT PIPE COLLAR

VENT PIPE

SHIELD

FIGURE 36

perature sealant around the outside of the 4" elbow. Pull

the adjustable pipe a minimum 2" onto the elbow. Secure

with 3 screws. Repeat with the 7" telescopic pipe.

TOP VENT APPLICATION: Run a bead of high tempera- ture sealant around the outside of the 4" collar on the fire- place. Pull the adjustable pipe a minimum of 2" onto the collar. Secure with 3 screws. Repeat with the 7" telescopic pipe.

10.In the attic, slide the vent pipe collar down to cover up the open end of the shield and tighten. This will prevent any materials, such as insulation, from filling up the 1" air space around the pipe.

RESTRICTING VERTICAL VENTS

Model GD36NTR Vertical Terminal only:

Vertical terminations running longer than 15 feet may dis- play a very active flame. If this appearance is not desirable, the vent exit must be restricted using restrictor plate kit, RP-KT. This reduces the velocity of the exhaust gases, slowing down the flame pattern and creating a more tradi- tional appearance. Specific instructions are included with the kit.

W415-0210 / E / 06.25.03

BGD36PTR, BGD36NTR, GD36PTR, GD36NTR specifications

Napoleon Fireplaces is a brand renowned for its commitment to quality, innovation, and style in home heating solutions. Among their exceptional offerings are the GD36NTR, GD36PTR, BGD36NTR, and BGD36PTR models, which epitomize modern gas fireplace design with an array of features, technologies, and characteristics.

The GD36NTR (Natural Gas) and GD36PTR (Propane) models are designed to provide warmth and ambiance with elegance. These fireplaces boast a compact yet stylish design that fits seamlessly into any living space. The impressive heat output ranges up to 30,000 BTUs, ensuring a cozy environment even in the coldest months. The included large glass viewing area enhances the aesthetics of the fireplace, allowing for an unobstructed view of the mesmerizing flames.

Equipped with Napoleon’s advanced heat radiating system, the GD36 series enhances warmth distribution, making it efficient and effective. The innovative electronic ignition ensures that lighting the fireplace is easy and reliable, offering both convenience and safety.

In contrast, the BGD36 series, consisting of BGD36NTR and BGD36PTR, brings a different approach with its built-in design suited for new constructions and renovations. These models emphasize versatility and adaptability, fitting into a variety of settings. The BGD36 models similarly deliver aesthetic appeal with their expansive glass front, and they feature a powerful heat output of up to 30,000 BTUs.

Both the GD36 and BGD36 series integrate Napoleon’s patented PHAZER® Log Set that mimics the look of real wood logs, ensuring a lifelike flame experience. The adjustable flame height feature allows users to customize the ambiance according to their moods, ranging from a gentle glow to full, roaring flames.

Another remarkable feature is the multi-function remote control that provides fingertip access to all fireplace functions, enhancing user experience. Complementing these features is the inclusion of a safety screen, which ensures that families can enjoy their fires with peace of mind.

Both series highlight energy efficiency, complying with strict environmental regulations while providing the coziness expected from a traditional fireplace. With their stylish designs, innovative technologies, and commitment to safety and efficiency, the Napoleon Fireplaces GD36NTR, GD36PTR, BGD36NTR, and BGD36PTR make the perfect addition to any home, blending warmth and modern sophistication.