Napoleon Fireplaces BGDV42N Using Flexible Vent Components, Vertical AIR Terminal Installation

Page 14
FIGURE 19

14

USING FLEXIBLE VENT COMPONENTS

Use only approved aluminum flexible liner kits marked:

"Wolf Steel Approved Venting" as identified by the stamp only on the 8” outer liner.

For safe and proper operation of the fireplace, follow the venting instructions exactly.

HORIZONTAL AIR TERMINAL INSTALLATION

AVENT SHIELD MUST BE USED IF THE WALL TERMINAL IS INSTALLED ON COMBUSTIBLE, EXTERIOR SURFACES.

1.Cut or frame a hole in an exterior wall with a minimum round or square opening of 10½ inches. Secure the firestop spacer over the opening to the interior wall.

2.Stretch the 5" diameter aluminum flexible liner to the required length taking into account the additional length needed for the finished wall surface. Slip the liner a mini- mum of 2" over the inner sleeve of the air terminal and secure with 3 #8 screws. Apply a heavy bead of the high temperature sealant.

3.Using the 8" diameter flexible aluminum liner, slide over the outer combustion air sleeve of the air terminal and secure with 3 #8 screws. Seal as before.

FIGURE 18

The air terminal mounting plate may be recessed into the exterior wall or siding by 1½", the depth of the return flange.

4.Insert the liners through the firestop maintaining the required clearance to combustibles. Holding the air termi- nal (lettering in an upright, readable position), secure to the exterior wall and make weather tight by sealing with caulking (not supplied).

5.Apply a heavy bead of the high temperature sealant, supplied with the unit, to the inside of the 5" liner approxi- mately 1" from the end. Slip the liner a minimum of 2" over the fireplace vent collar and secure with 3 #8 screws.

6.Using the 8" diameter flexible aluminium liner, apply sealant, slide a minimum of 2" over the fireplace combus- tion air collar and secure with 3 #8 screws.

7.If more liner needs to be used to reach the fireplace, couple them together as illustrated. The vent system must be supported approximately every 3 feet for both vertical and horizontal runs. Use noncombustible strapping to maintain the minimum 1" clearance to combustibles.

8.The heat shield must

be installed only when ter- FIGURE 20 minating horizontally with

no vertical rise. Remove the two screws nearest the vent collars on the top of the fireplace. Align the vent shield (supplied) and secure.

VERTICAL AIR TERMINAL INSTALLATION

FIGURE 21

1. Fasten the roof support to the roof using the screws provided. The roof support is optional. In this case the venting is to be

adequately supported us-

ing either an alternate method suitable to the au-

thority having jurisdiction or the optional roof support.

2.Stretch the 5" diameter aluminium flexible liner to the required length. Slip the liner a minimum of 2" over the inner sleeve of the air terminal and secure with 3 #8 screws. Seal using a heavy bead of the high temperature sealant.

3.Repeat using 8" diameter

aluminium flexible liner.

FIGURE 22

4. Thread the air terminal pipe

 

assembly down through the roof.

 

The air terminal must be located

 

vertically and plumb. Attach the air

 

terminal assembly to the roof

 

support, ensuring that a mini-

 

mum 16" of air terminal will pen-

 

etrate the roof when fastened.

 

DO NOT CLAMP THE FLEXIBLE

 

ALUMINIUM LINER.

 

W415-0381 / C / 05.13.04

Image 14
Contents Direct Vent Millivolt System Table of Contents Napoleon GAS Fireplace Presidents Lifetime Limited Warranty Care of GLASS, and Plated Parts General InstructionsGeneral Information Venting Venting LengthsAIR Terminal Installations Typical Vent Installations Special Vent InstallationsVenting Application Flow Chart Horizontal Termination VerticalElbow Vent Length Values Horizontal TerminationDefinitions Formula 1 HT 4.2 VT Formula 2 HT + VT 24.75 feet Vertical Termination Formula 1 HT 3VT Formula 2 HT + VT 40 feet Example Installation Wall and Ceiling Protection Vertical Installation Horizontal InstallationUsing Flexible Vent Components Vertical AIR Terminal InstallationUsing Rigid Vent Components Fireplace Vent ConnectionRestricting Vertical Vents Vertical Venting InstallationGAS Installation Mobile Home Installation FramingNailing TAB Installation Mantle InstallationFinishing GDL42 Louvre Installation Logo PlacementL42 Louvre Installation Porcelain Reflective PanelsCharcoal Lumps Charcoal EmbersVermiculite Optional Blower Installation Optional FAN Installation GD36 Thermostatic Sensor ControlOperating Instructions Operation / MaintenanceMaintenance Venturi Adjustment AdjustmentsPilot Burner Adjustment Accessories ReplacementsReplacement Parts W415-0381 / C Trouble Shooting Guide Symptom Problem Test SolutionDo not Clean Glass When HOT

BGDV42P, BGDV42N specifications

Napoleon Fireplaces has long been synonymous with quality and innovation in the heating and home comfort space. Among their impressive lineup, the BGDV42N and BGDV42P gas fireplaces stand out as exceptional options that combine aesthetic appeal with advanced technology. Designed to meet various needs, these models enhance any living space while providing efficient warmth.

The BGDV42N and BGDV42P feature a large, realistic flame pattern that creates a comforting ambiance. With a viewing area that significantly improves the overall visual impact, users can enjoy a spectacular fire display, making these models perfect for both modern and traditional homes. The glass front design ensures optimal heat retention and efficiency, allowing homeowners to relish in both style and functionality.

Both models operate with unrivaled efficiency, employing innovative technologies such as the advanced variable speed blower. This feature enhances heat distribution throughout the room, ensuring that warmth reaches every corner. Furthermore, their electronic ignition with battery backup ensures dependable performance even during power outages, making them practical choices for any season.

The BGDV42N and BGDV42P come equipped with Napoleon's patented NIGHT LIGHT technology, providing ambient illumination even when the fireplace is turned off. This feature adds versatility, allowing homeowners to create a welcoming atmosphere at any time. The fireplaces also include a choice of decorative media options such as modern crystals or traditional logs, enabling users to customize the appearance to match their personal style.

Safety and ease of use are paramount, and both models offer a range of convenient controls. The remote control allows homeowners to adjust the flame height and temperature with ease, while the built-in safety features, including a glass front that remains cool to the touch, ensure peace of mind during use.

With their combination of beautiful design, advanced technology, and reliable performance, the Napoleon BGDV42N and BGDV42P gas fireplaces represent the pinnacle of modern heating solutions. Whether you seek to upgrade an existing space or create an inviting new focal point, these models provide an ideal solution for comfort and style. Embrace the warmth and elegance that Napoleon Fireplaces offers and transform your living area into a cozy retreat.