Napoleon Fireplaces BGD90NT, BGD90PT manual Framing, Clearance to Combustibles

Page 13

 

FRAMING

The

can be installed with a rectangular opening.

It is best to frame your fireplace after it is positioned and the vent system is installed. Use 2x4’s and frame to local build- ing codes.

Note: In order to avoid the possibility of exposed insulation or vapour barrier coming in contact with the fi replace body, it is recommended that the walls of the fi replace enclosure

13

CLEARANCE TO COMBUSTIBLES

MAINTAIN THESE MINIMUM CLEARANCES TO COMBUS- TIBLES:

Fireplace framing - 0” to stand-offs (top, rear & sides) Fireplace finishing - 4 3/4” to sides of fireplace opening.

- 22 3/8” to top of fireplace opening.

FIGURE 28

be “fi nished” (ie: drywall/sheetrock), as you would fi nish any other outside wall of a home. This will ensure that clearance to combustibles is maintained within the cavity.

For convenience, the stand-offs have been shipped flat. Before framing, ensure the stand-offs are opened and screwed in place.

It is not necessary to install a hearth extension, but the fi re- place should be raised to be fl ush with either the hearth or the fi nished fl oor.

When roughing in the fi replace, raise the fi replace to accom- modate for the thickness of the fi nished fl oor materials, i.e. tile, carpeting, hard wood, which if not planned for will interfere

NON-COMBUSTIBLE

FINISHING MATERIAL

60 3/4"

 

 

 

 

Non-combus-

 

 

 

 

tible finishing

 

 

 

 

material (ie:

 

 

 

 

 

22 3/8"

 

 

cement board,

 

 

 

brick, stone,

 

71

1/4"

 

 

 

 

tile) must be

 

 

 

 

 

 

 

 

used to finish

 

 

 

 

the front facing

 

 

 

 

of the unit.

 

 

 

 

 

 

 

 

 

 

43/4"

with the removal of the hearth strip, which must be removed to access the fi rebox.

Objects placed in front of the fi replace should be kept a mini- mum of 48” away from the front face.

1"

 

FIGURE 26

MIN

 

 

1"

 

 

MIN

 

 

82"

 

 

 

 

"

 

59

1/4

 

116"

 

 

 

 

72"

 

 

59 1/4"

 

 

29"

 

 

FIGURE 27

 

 

29"

 

59 1/4"

 

IMPORTANT:

The requires a minimum inside enclosure height of 72”. Measured from the bottom of the fire- place.

For temperature require- ments, this area must be left unobstructed.

It is recommended that the enclosure be ventilated at the top and bottom to circu- late the hot air.

*Non combus- tible material

must extend NON-COMBUSTIBLE

72” at which top of enclo- sure can be combustible

COMBUSTIBLE

MATERIAL

 

FIRESTOP

 

SPACER

STUD

2"

 

2"

STAND OFF

 

SPACER

 

 

FIGURE 29

29"

 

59 1/4"

10"

 

MIN

WARNING

Facing and/or finishing

material must never

overhang into the fireplace

opening.

W415-0614 / A / 07.24.07

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Installation Table of Contents Napoleon GAS Fireplace PRESIDENT’S Lifetime Limited Warranty General Information General InstructionsTo stand-offs top, rear and sides Vent pipe InchesCare of GLASS, and Plated Parts VentingVenting Lengths & AIR Terminal Locations Definitions TOP Exit / Horizontal TerminationElbow Vent Length Values = 1.5 ft = 4 ft= V1 + V2 = 4 + 1.5 = 5.5 ft = 2 ftTOP Vertical Termination TOP Exit Vertical TerminationAIR Terminal Installations Vertical Installation Installation Wall and Ceiling ProtectionHorizontal Installation See figure15Horizontal AIR Terminal Installation Using Flexible Vent ComponentsVertical AIR Terminal Installation Use only approved aluminum flexible liner kits markedRestricting Vertical Vents Mobile Home InstallationClearance to Combustibles Framing22 3/8 to top of fireplace opening Access panel must be re-installed before operating the unit Hard Wiring ConnectionIt is necessary to hard wire this fireplace Electrical ConnectionFinishing GLASS/DOOR ReplacementDoor Removal LOG Shipping BracketInstall Panels in the Following Order Brick Panel InstallationLOG Placement Andiron PlacementCharcoal Embers Night Light ReplacementVermiculite Glowing EmbersRemote and Valve Access Time OUT Operation / MaintenanceFireplace Operation Hand Held Remote OperationsFAN Speed Setting Address Setting Procedure DIP Switch Number 0 = on / 1 = OFF Operating Instructions For Your Safety Read Before LightingLighting Instructions What to do if YOU Smell GASMaintenance AdjustmentsFuel Conversion Flame Characteristics Pilot Burner AdjustmentVenturi Adjustment Check Pressure Readings FigReplacements 000 Symptom Problem Test Solution Trouble Shooting GuideCheck that the wire is connected to the spark module Fireplace Service History W415-0614 / a
Related manuals
Manual 32 pages 38.75 Kb

BGD90PT, BGD90NT specifications

The Napoleon Fireplaces BGD90PT and BGD90NT represent the pinnacle of modern fireplace design, combining cutting-edge technology with timeless aesthetics. These models are specifically crafted for those who value both warmth and style in their living spaces.

One of the standout features of the BGD90PT and BGD90NT is their large viewing area, which allows an unobstructed view of the flames, creating a mesmerizing focal point in any room. The expansive glass front enhances the ambiance of the fire, making it feel more immersive and inviting. This sleek design not only provides aesthetic benefits but also improves heat distribution, contributing to the overall efficiency of the fireplace.

The BGD90PT (Propane) and BGD90NT (Natural Gas) models utilize a range of advanced technologies to enhance performance. The patented PHAZER® technology creates a beautiful and realistic flame effect, while the variable speed blower and adjustable heat output allow for customized comfort levels. This precise control ensures that users can maintain the perfect temperature, regardless of outside conditions.

Furthermore, these models are engineered with Napoleon's exclusive TOP-VENT technology, which provides flexible venting options for easy installation. This feature allows homeowners to maximize their living space and choose the venting configuration that best suits their home’s layout.

The BGD90PT and BGD90NT also prioritize safety and efficiency. Both models are equipped with an electronic ignition system that provides reliable start-up, eliminating the hassle of traditional pilot lights. Additionally, the fireplaces include a built-in safety barrier to prevent accidental contact with the glass, making them suitable for homes with children and pets.

With their impressive heat output, the BGD90PT and BGD90NT can efficiently warm larger spaces, contributing to the overall comfort of your home. Their Energy Star rating ensures that they meet the highest standards for energy efficiency, making them an eco-friendly choice.

In terms of design, both models feature a contemporary look that complements various interior styles. From rustic to modern aesthetics, the BGD90PT and BGD90NT can enhance any home décor while providing the warmth and ambiance of a traditional fireplace.

In conclusion, the Napoleon Fireplaces BGD90PT and BGD90NT are an exceptional fusion of design, technology, and efficiency. Their impressive features make them an ideal choice for anyone looking to add a touch of elegance and functionality to their space, all while enjoying the comforting warmth of a beautiful fire.
Top Page Image Contents