Operating Instructions

FOR YOUR SAFETY READ BEFORE

LIGHTING:

A.This ﬁ replace is equipped with a pilot which must be lit by hand while following these instructions exactly.

B.Before operating smell all around the ﬁ replace area for gas and next to the ﬂ oor because some gas is heavier than air and will settle on the ﬂ oor.

C.Use only your hand to turn the gas control knob / manual shut-off knob. Never use tools. If the knob will not turn by hand, do not try to repair it. Call a qualiﬁ ed service technician. Force or attempted re pair may result in a ﬁ re or explosion.

D.Do not use this ﬁ replace if any part has been under water. Immediately call a qualiﬁ ed service technician to inspect the ﬁ replace and replace any part of the control system and any gas control which has been under water.

LIGHTING INSTRUCTIONS

Warning: if you do not follow these instructions exactly, a ﬁ re or explosion may result causing property damage, personal injury or loss of life. Initial lighting of the pilot and main burners must be done with the glass door off.

Do not connect valve or wall switch to electricity. See installation instructions.

When lighting and re-lighting, the gas knob cannot be turned from pilot to off unless the knob it depressed slightly.

1.STOP! Read the safety information on the operating label.

2.Turn off all electric power to the ﬁ replace.

3.Turn the gas knob clockwise to off.

4.Wait 5 minutes to clear out any gas. If you smell gas, including near the ﬂ oor, STOP! Follow “B” on the op- erating label. If you don’t smell gas, go to the next step.

5.If the ﬁ replace is equipped with a ﬂ ame adjustment valve, turn clockwise to off.

6.Find pilot located in front of the back log on the right.

7.Turn gas knob clockwise to pilot.

8.This unit is equipped with an auto-spark. Depress and hold gas knob . Keep knob fully depressed for one minute, then release. If pilot does not continue to burn repeat steps 3 through 7.

9.With pilot lit, push and turn gas knob counter-clock

wise to on.

10.If equipped with ﬂ ame adjustment valve, turn knob to high.

11.If equipped with remote on-off switch, main burner may not come on when you turn the valve to on or high. Remote switch must be in the

on position to ignite burner.

12.Turn on all electric power to the ﬁ replace.

FIGURE 50

When lit for the ﬁ rst time, the ﬁ replace will emit a slight odour for a few hours. This is a normal temporary condi- tion caused by the curing of the logs and the “burn-in” of internal paints and lubricants used in the manufacturing process and will not occur again. Simply open a window to sufﬁ ciently ventilate the room.

After extended periods of non-operation such as following a vacation or a warm weather season, the ﬁ replace may emit a slight odour for a few hours. This is caused by dust particles in the heat exchanger burning off. Open a window to sufﬁ ciently ventilate the room.

Purge all gas lines with the glass door of the fireplace removed. Assure that a continuous gas flow is at the burner before installing the door.

WHAT TO DO IF YOU SMELL GAS

•Do not touch any electric switch.

•Do not use any phone in your building.

•If you cannot reach your gas supplier, call the ﬁ re department.

•Turn off all gas to the ﬁ replace.

•Do not try to light any appliance.

•Immediately call your gas supplier from a

neighbor’s phone. Follow the gas ILO

supplier’s instructions.P T

	F	O
	F	N
FIGURE 51	O	N
	O

	GAS KNOB

TO TURN OFF GAS

1.Turn off all electric power to the ﬁ replace if service is to be performed.

2.For a complete shut-down procedure: push in gas

control knob slightly and turn clockwise to off. Do not force.

3.For a temporary shut-down procedure: set the switch to off. Press and turn the gas knob clockwise to pilot.

W415-0614 / A / 07.24.07

BGD90PT, BGD90NT specifications

The Napoleon Fireplaces BGD90PT and BGD90NT represent the pinnacle of modern fireplace design, combining cutting-edge technology with timeless aesthetics. These models are specifically crafted for those who value both warmth and style in their living spaces.

One of the standout features of the BGD90PT and BGD90NT is their large viewing area, which allows an unobstructed view of the flames, creating a mesmerizing focal point in any room. The expansive glass front enhances the ambiance of the fire, making it feel more immersive and inviting. This sleek design not only provides aesthetic benefits but also improves heat distribution, contributing to the overall efficiency of the fireplace.

The BGD90PT (Propane) and BGD90NT (Natural Gas) models utilize a range of advanced technologies to enhance performance. The patented PHAZER® technology creates a beautiful and realistic flame effect, while the variable speed blower and adjustable heat output allow for customized comfort levels. This precise control ensures that users can maintain the perfect temperature, regardless of outside conditions.

Furthermore, these models are engineered with Napoleon's exclusive TOP-VENT technology, which provides flexible venting options for easy installation. This feature allows homeowners to maximize their living space and choose the venting configuration that best suits their home’s layout.

The BGD90PT and BGD90NT also prioritize safety and efficiency. Both models are equipped with an electronic ignition system that provides reliable start-up, eliminating the hassle of traditional pilot lights. Additionally, the fireplaces include a built-in safety barrier to prevent accidental contact with the glass, making them suitable for homes with children and pets.

With their impressive heat output, the BGD90PT and BGD90NT can efficiently warm larger spaces, contributing to the overall comfort of your home. Their Energy Star rating ensures that they meet the highest standards for energy efficiency, making them an eco-friendly choice.

In terms of design, both models feature a contemporary look that complements various interior styles. From rustic to modern aesthetics, the BGD90PT and BGD90NT can enhance any home décor while providing the warmth and ambiance of a traditional fireplace.

In conclusion, the Napoleon Fireplaces BGD90PT and BGD90NT are an exceptional fusion of design, technology, and efficiency. Their impressive features make them an ideal choice for anyone looking to add a touch of elegance and functionality to their space, all while enjoying the comforting warmth of a beautiful fire.