Operation, To Operate | Wachsmuth & Krogmann C-3196 specification

OPERATION

During the first few minutes of initial use, you may notice a slight odor; this is normal and will quickly disappear.

Overheat Indicator Power Indicator

Power	Thermostat
Switch	Dial

TO OPERATE

1.Place the product on a flat, steady, stable, heat-resistant surface.

2.Plug the Power Cord into a standard 120V AC electrical outlet.

3.To turn on the heater, rotate the Power Switch to the desired setting: FAN (no heat), LOW (500 watts), MED (1000 watts), or HIGH (1500 watts).

4.Set the Thermostat Knob to the desired level.

5.To turn off the heater: rotate the Power Switch to the “OFF” position.

6.Unplug the product from the electrical outlet if leaving it unattended or while it is not in use.

TO SET THE THERMOSTAT

1.Turn the Thermostat Knob clockwise all the way to the end of its range.

2.Allow the heater to warm up until the ambient room temperature reaches your desired comfort level.

3.Slowly turn the Thermostat Knob counterclockwise until the heater turns off. Turn knob slightly clockwise until heater turns on again.

4.The heater will start up again and turn off to maintain the current room temperature at that thermostat setting.

NOTE: The lower the thermostat setting, the lower the room temperature. The higher the thermostat setting, the higher the room temperature.

C-3196 specifications

Wachsmuth & Krogmann C-3196 stands as a remarkable example of advanced engineering in the world of industrial machinery. This machine has been designed to meet the needs of modern production facilities, where efficiency, precision, and reliability are paramount.

One of the standout features of the C-3196 is its robust construction, which ensures durability even under the most demanding operating conditions. Constructed from high-quality materials, it provides a long service life and minimizes maintenance costs, making it a valuable investment for any manufacturing setup.

At the heart of the C-3196 is its innovative drive technology. The machine utilizes a state-of-the-art servo drive system that offers unparalleled control over the operational functions. This technology allows for rapid acceleration and deceleration, ensuring that production cycles are optimized without sacrificing quality. The servo drives also help to reduce energy consumption, aligning with modern demands for sustainable and eco-friendly manufacturing processes.

The C-3196 is equipped with an intuitive user interface, which enhances usability and operator efficiency. Users can easily navigate through various functions, set parameters, and monitor performance metrics in real-time. This system minimizes training time for new operators and increases overall productivity.

Another notable characteristic of the Wachsmuth & Krogmann C-3196 is its versatility. The machine is capable of performing a wide range of applications, from simple tasks to complex operations, making it suitable for various industries, including automotive, electronics, and consumer goods. This adaptability is bolstered by interchangeable tooling and attachments, which can be easily swapped to meet specific production requirements.

In terms of safety, the C-3196 does not compromise. It comes with multiple safety features, such as emergency stop buttons, protective guards, and compliance with international safety standards. These features not only protect operators but also contribute to the overall reliability of the machine.

In summary, the Wachsmuth & Krogmann C-3196 is a cutting-edge industrial machine that combines strength, precision, and adaptability. With its advanced drive technology, user-friendly interface, and versatile application capabilities, it stands as an essential tool for manufacturers seeking to enhance their productivity while maintaining the highest quality standards. The C-3196 embodies the future of industrial machinery, meeting the evolving demands of the modern manufacturing landscape.