Vermont Casting 3370, RUVSOD: 3357, 3358 Assemble the Legs, Install Optional Fan, Kit Contents

Page 10

Radiance Vent-Free Gas Heater

Assemble the Legs

1.Slide stove to the rear of the pallet just far enough to access rear leg holes. Make sure the stove does not tip over backwards. (Fig. 7)

ST720

Fig. 7 Slide stove back just far enough to access rear leg holes.

2.Attach the rear legs using 3/8” hex head bolts and flat washer supplied. Tighten with a 9/16” wrench or socket.

3.Carefully tip the stove onto its rear legs. Adjust the pallet to allow access to one of the front leg holes. Be sure to leave the pallet under the stove to prevent the stove from falling fully forward. (Fig. 8)

CAUTION: To prevent valve tubing from being crushed or damaged, make sure to rest valve on wooden pallet.

 

Washer

ST721

Hex Head Bolt

Fig. 8 Carefully tip stove onto back legs. Leave pallet under stove to keep stove from falling fully forward.

4.Have your assistant attach one leg using the hard- ware described.

5.Move the pallet to allow access to the other front leg hole. Attach remaining leg.

6.Remove pallet and allow stove to gently rest on all four legs.

7.Adjust leg levelers to compensate for irregularities in the hearth.

Install Optional Fan

It is easiest to install the optional fan kit #2767/FK26, before the stove is moved to its final location or con- nected to the gas line.

The fan consists of a blower assembly and a rheo- stat switch that are connected by a wire harness. The blower attaches to a bracket at the bottom of the rear shroud. The rheostat installs at the bottom of the stove on the left of the valve.

The fan kit includes a ‘snapstat’, a temperature-sens- ing switch which will be mounted to the blower duct just below the top plate of the stove. The snapstat automati- cally turns the fan on or off at approximately 109°F.

The rheostat provides a range of fan speed settings from OFF (which overrides the snapstat function) to high.

Kit Contents

• Fan assembly with rheostat and snapstat

• wire tie

• control knob • retaining collar

CAUTION: Sheet metal edges can be sharp. Be sure to wear protective gloves.

1.Loosen the four phillips head screws which secure the rear shroud to the stove sides. (Fig. 9)

2.Carefully pull the shroud assembly away from the rear of the stove.

3.With the rear shroud assembly in the upright posi- tion, set the bottom of the shroud on a padded surface to prevent scratching the surface. Unfasten the four phillips head screws which attach the outer shroud to the inner duct assembly.

Rear Shroud As- sembly

ST189

Fig. 9 Loosen four phillips screws holding rear shroud as- sembly and remove. Remove four phillips screws holding rear shroud to inner duct assembly. Remove rear shroud.

10

20004555

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Radiance Table Of Contents Installation & Operating Instructions Carbon Monoxide Poisoning MAY Lead to DeathRadiance Vent Free Gas Heater Dimensions Radiance Vent Free dimensionsHearth Requirements Do not install this heater in a bathroom or bed- roomMinimum Clearances to Combustible Materials Mantel fromHigh Elevations Gas SpecificationsGas Inlet and Manifold Pressures Odor During OperationProvide For Adequate Ventilation Vent Free FeaturesFresh Air Requirements for Combustion Ventilation Unusually Tight ConstructionR N I N G Tools Required Assembly ProceduresHardware Bag Contents Unpacking the RadianceKit Contents Install Optional FanAssemble the Legs Attach the fan assembly to the fan bracket Install ON/OFF Switch Thermostat Connection OptionalGlass & Catalyst Installation Be sure injector orifices remain at 90 to the baseConnect the Gas Supply Line Install Log SetAged Logs Complete the Installation Install the left and right rear logs and the right logOperation Flame CharacteristicsFlame & Temperature Adjustment Your First FireTo Turn Off Gas To Heater What to do if YOU Smell GASNo spark at pilot when Ignitor is operated TroubleshootingIgnitor Electrode sparks, but Pilot does not light Main Burner shuts off and Pilot Pilot lights but Main Burner does notflame goes out while in operation Cleaning Procedure MaintenanceFirebox Cleaning and Inspection Glass ReplacementRemove the Combustor Module Clean the Combustor ModuleCatalytic Combustor Replace the Combustor ModuleDescription RuvsodRadiance Vent Free Gas Heater Ruvsod Shell Enamel Part Numbers Radiance Vent Free Gas HeaterOptional Accessories Radiance Vent-Free Gas Heater Radiance Vent-Free Gas Heater Limited Lifetime Warranty If Warranty Service is NEEDED…CFM Specialty Home Products

3358, RUVSOD: 3357, 3370, thru 3379 specifications

Vermont Casting's RUVSOD series, comprising models 3357, 3358, 3370, and 3379, is widely recognized for its exceptional performance and timeless design. These wood stoves are crafted from durable cast iron, ensuring longevity and optimal heat retention. Each model in the RUVSOD line showcases Vermont Casting's commitment to quality, efficiency, and aesthetic appeal.

One of the key features of the RUVSOD series is its remarkable efficiency. With an EPA-certified efficiency rating, these stoves are designed to maximize heat output while minimizing emissions. Users can enjoy a clean-burning fire that not only warms their space but also meets environmental standards. This efficiency is complemented by advanced technologies such as secondary combustion and catalytic converters, which enhance combustion processes and further reduce smoke and particulate emissions.

The RUVSOD models also come equipped with Vermont Casting's unique AirWash system. This innovative feature helps keep the glass door clean, allowing users to enjoy an unobstructed view of the flames. Additionally, the stoves in this series feature a customizable design, allowing consumers to choose from an array of colors and finishes that suit their interior decor. The stylish look of each stove adds a touch of elegance to any living space.

Another standout characteristic of the RUVSOD models is their user-friendly controls. An easy-to-use draft control system makes it simple to adjust the heat output and burn rate according to individual preferences. This ensures that users can maintain a comfortable and cozy atmosphere in their homes throughout the colder months.

In terms of heating capacity, these models can efficiently warm homes of various sizes, which makes them versatile for both small and large spaces. Their high heat output combined with long burn times ensures that users can enjoy hours of continuous heat without the need for frequent refueling.

In summary, the Vermont Casting RUVSOD series—models 3357, 3358, 3370, and 3379—represents the perfect blend of performance, style, and efficiency. With features such as advanced combustion technology, a customizable aesthetic, user-friendly controls, and impressive heating capabilities, these wood stoves stand as a premier choice for those looking to enhance their living space with an effective and attractive heating solution.
Top Page Image Contents