Vermont Casting 3370, RUVSOD: 3357 Troubleshooting, No spark at pilot when Ignitor is operated

Page 18

Radiance Vent-Free Gas Heater

Troubleshooting

Follow these procedures in the order presented.

W A R N I N G

TURN OFF HEATER AND ALLOW TO COOL

COMPLETELY BEFORE SERVICING.

CONDITION

POSSIBLE CAUSE

SOLUTION

No spark at pilot when Ignitor is operated.

1.Ignition Electrode is disconnected from ignition wire, broken or incor- rectly positioned.

2.Ignitor wire is broken.

3.Bad Piezo Ignitor.

1.Inspect and re-connect, replace or repair as necessary.

2.Replace wire.

3.Replace Piezo Ignitor.

The Ignitor Electrode sparks, but Pilot does not light.

1.Gas supply is turned off or supply line shut-off valve is closed.

2.Control Knob is not in PILOT posi- tion.

3.Control Knob not pressed in while in PILOT position.

4.Air present in gas lines.

5.Inlet supply pressure is not within correct settings.

1.

Turn on gas supply or open sup-

 

ply line shut-off valve.

2.

Turn Control Knob to PILOT.

3.

Press Control Knob in while in

 

the PILOT position.

4.

Continue holding in Control Knob

 

and repeat ignition procedure

 

until air is bled from the lines.

5.

Call local gas supplier. Adjust

 

inlet supply pressure to specifica-

 

tion: NG; 5.5” w.c.-14.0”w.c. LP;

 

11.0” w.c.-14.0”w.c.

6. Other conditions that should be identified only by a qualified gas technician.

 

 

 

Piezo Ignitor

 

 

 

 

PILOT

OFF

 

 

L

 

 

I

 

 

 

H

ON

 

 

O

 

 

 

 

 

PILOT ADJ

 

 

Regulator

 

 

HV104

 

 

 

Pilot / Main Control

Fig. 34

Honeywell valve assembly.

 

18

 

 

 

 

6. Call qualified gas technician.

20004555

Image 18
Contents Radiance Table Of Contents Installation & Operating Instructions Carbon Monoxide Poisoning MAY Lead to DeathRadiance Vent Free Gas Heater Dimensions Radiance Vent Free dimensionsHearth Requirements Do not install this heater in a bathroom or bed- roomMinimum Clearances to Combustible Materials Mantel fromHigh Elevations Gas SpecificationsGas Inlet and Manifold Pressures Odor During OperationProvide For Adequate Ventilation Vent Free FeaturesFresh Air Requirements for Combustion Ventilation Unusually Tight ConstructionR N I N G Tools Required Assembly ProceduresHardware Bag Contents Unpacking the RadianceInstall Optional Fan Kit ContentsAssemble the Legs Attach the fan assembly to the fan bracket Install ON/OFF Switch Thermostat Connection OptionalGlass & Catalyst Installation Be sure injector orifices remain at 90 to the baseInstall Log Set Connect the Gas Supply LineAged Logs Complete the Installation Install the left and right rear logs and the right logOperation Flame CharacteristicsFlame & Temperature Adjustment Your First FireTo Turn Off Gas To Heater What to do if YOU Smell GASTroubleshooting No spark at pilot when Ignitor is operatedIgnitor Electrode sparks, but Pilot does not light Pilot lights but Main Burner does not Main Burner shuts off and Pilotflame goes out while in operation Cleaning Procedure MaintenanceFirebox Cleaning and Inspection Glass ReplacementRemove the Combustor Module Clean the Combustor ModuleCatalytic Combustor Replace the Combustor ModuleDescription RuvsodRadiance Vent Free Gas Heater Ruvsod Shell Enamel Part Numbers Radiance Vent Free Gas HeaterOptional Accessories Radiance Vent-Free Gas Heater Radiance Vent-Free Gas Heater Limited Lifetime Warranty If Warranty Service is NEEDED…CFM Specialty Home Products

3358, RUVSOD: 3357, 3370, thru 3379 specifications

Vermont Casting's RUVSOD series, comprising models 3357, 3358, 3370, and 3379, is widely recognized for its exceptional performance and timeless design. These wood stoves are crafted from durable cast iron, ensuring longevity and optimal heat retention. Each model in the RUVSOD line showcases Vermont Casting's commitment to quality, efficiency, and aesthetic appeal.

One of the key features of the RUVSOD series is its remarkable efficiency. With an EPA-certified efficiency rating, these stoves are designed to maximize heat output while minimizing emissions. Users can enjoy a clean-burning fire that not only warms their space but also meets environmental standards. This efficiency is complemented by advanced technologies such as secondary combustion and catalytic converters, which enhance combustion processes and further reduce smoke and particulate emissions.

The RUVSOD models also come equipped with Vermont Casting's unique AirWash system. This innovative feature helps keep the glass door clean, allowing users to enjoy an unobstructed view of the flames. Additionally, the stoves in this series feature a customizable design, allowing consumers to choose from an array of colors and finishes that suit their interior decor. The stylish look of each stove adds a touch of elegance to any living space.

Another standout characteristic of the RUVSOD models is their user-friendly controls. An easy-to-use draft control system makes it simple to adjust the heat output and burn rate according to individual preferences. This ensures that users can maintain a comfortable and cozy atmosphere in their homes throughout the colder months.

In terms of heating capacity, these models can efficiently warm homes of various sizes, which makes them versatile for both small and large spaces. Their high heat output combined with long burn times ensures that users can enjoy hours of continuous heat without the need for frequent refueling.

In summary, the Vermont Casting RUVSOD series—models 3357, 3358, 3370, and 3379—represents the perfect blend of performance, style, and efficiency. With features such as advanced combustion technology, a customizable aesthetic, user-friendly controls, and impressive heating capabilities, these wood stoves stand as a premier choice for those looking to enhance their living space with an effective and attractive heating solution.