Vermont Casting 2477CE manual Operation, Heater Controls and Features Air Control

Page 13

Dutchwest Non-Catalytic Convection Heater

Operation

Heater Controls and Features

Air Control

The Dutchwest Convection Heater Model 2477CE has a control that regulates the amount of air drawn into the stove. Generally, more air entering the stove allows the fire to burn hotter and faster, while less air decreases heat output and prolongs the overall burn time.

The Air Control Lever is located at the lower front edge of the left side (looking from the front of the stove). (Fig. 19) The lever operates two internal shut- ters. Opening the inlet shutters provides air for primary combustion.

Damper

Side Loading

Door

Primary

Air Control

Lever

Front Loading Door

ST810

Fig. 19 The heater controls.

To open the shutters, turn the lever clockwise. The shutters are all the way open when the lever points to- ward the rear at a “9:00” position. (Fig. 20) To close the shutters, turn the lever counterclockwise. The shutters are fully closed when the lever points straight down. (Fig. 21)

Primary Air

Control Lever

 

ST811

Fig. 20

Turn primary air control lever clockwise to open.

 

ST812

Fig. 21 Turn primary air control lever counterclockwise to close.

30003849

13

Image 13
Contents Non-Catalytic Convection Heater Model 2477CE Accessories Table of ContentsDutchwest NC Model 2477CE SpecificationsChimney Types InstallationMasonry Chimneys Two Types of Connector Guidelines for Installing the Chimney ConnectorPrefabricated Chimneys Chimney SizeDouble-Wall Connector Single-Wall ConnectorAssembling Single-Wall Chimney Connector Securing the Connector to a Prefabricated ChimneyFreestanding Installations Securing the Connector to a Masonry ChimneyFireplace Installations Above the Fireplace Fireplace Installations Through the FireplaceHearths Wall Pass-ThroughsFloor Protection for Fireplace Installations Fireplace InstallationsKeep the Stove a Safe Distance From Surrounding Materials Clearances Connecting Flue Pipe ClearancesUnpack the Parts AssemblyAttach the Legs and Heat Shield Fan Kit Installation Operation Heater Controls and Features Air ControlBurn Only High-Quality Fuel Damper Function Successful Wood BurningLoad Doors How to Build and Maintain a Wood Fire Loading Wood Use the Air Control Settings That Work Best for YouBreak-in Fires Reloading and Reviving the Fire Lighting the FireSafe Ash Handling Remove Ashes FrequentlyCleaning the Glass MaintenanceAdjust the Door Latch Test and Repair the Door GasketsPrimary Air Control Adjustment Damper AdjustmentAvoid Damaging the Glass Door Panel Inspect Regularly, Clean As Required Cleaning the Chimney SystemMaintenance Schedule StoveMasonry Chimney Draft ManagementIndoor/ Outdoor Location Steel ChimneyFlue Sizing Pipe & Chimney LayoutCreosote Draft TestingBackpuffing Negative PressureDutchwest Convection Heater Dutchwest Convection Heater Dutchwest Non-Catalytic Convection Heater Limited Lifetime Warranty Mhsc