Vermont Casting 1655, 1656, 1657, 1658, 1659 Introduction, Table of Contents

Page 2

Vermont Castings Madison

Introduction

Thank you for choosing a Vermont Castings Madison to meet your heating needs.

We're confident you will find the Madison to be an effective woodburning heater incorporating modern, non-catalytic combustion technology with the classic aesthetic appeal of its Vermont Castings lineage.

The Madison achieves high-efficiency through precisely calibrated delivery of primary and secondary air into a refractory-insulated firebox. Properly operated and maintained according to the guidelines in this manual, your Madison will provide safe, dependable, and economical heating for years to come.

The Madison Model 1655 Series has been tested and is listed by Canadian Standards Association (CSA). The test standards are ANSI/UL-1482 for the United States and ULC S627 and CAN/CSA B366.2 for Canada.

The Madison Model 1655

Series is listed for burning wood fuel only. Do not burn other fuels.

C

US

 

 

The Madison Model 1655

Series is approved for installation in manufactured (mobile) homes

 

 

in the Unties States only, using the optional Mobile Home Kit #1894 in accordance with the

 

 

instructions in that kit an any local codes.

 

 

The Madison Model 1655 Series complies with the standards set forth by the Federal Environmental Protection Agency, 40 CFR Part 60.532(b)(2), as stated on the permanent label attached to each stove. The Madison Model 1655 Series meets Washington State requirements.

We recommend that you hire a professional, solid-fuel stove technician to install your Madison, or to advise you on the installation should you attempt to install it yourself. Consult the authority having local jurisdiction (such as a municipal building department, fire department, fire prevention bureau, etc.) before installation to determine the need for a building permit. Also, consult your insurance agent to be sure your installation complies with specific requirements that may vary locally.

In addition to directions on installation and operation, this manual includes directions on maintenance and assembly. Please read this entire manual before you install or operate your new room heater.

Save These Instructions For Future Reference.

Table of Contents

Specifications

3

Installation Requirements

4

Clearances

12

Assembly

15

Operation

17

Maintenance

20

Draft Management

22

Parts List

25

Installation

Accessories

#1891 Outside Air Kit

#1892 Bottom Heat Shield Kit

#1893 Rear Heat Shield Kit

#1894 Mobile Home Kit

Proposition 65 Warning: Fuels used in gas, woodburning or oil fired appliances, and the products of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm.

California Health & Safety Code Sec. 25249.6

2

Image 2
Contents Madison Table of Contents IntroductionSpecifications Madison, Model 1655 SeriesInstallation Masonry ChimneysChimney Size Chimney Connector GuidelinesPrefabricated Chimneys Securing the Single-wall Connector to a Masonry Chimney Double-wall Chimney ConnectorsSingle-wall Chimney Connectors Freestanding InstallationsRequirements Connection Above the FireplaceWall Pass-throughs Canadian Requirements Floor ProtectionSafe Ways To Reduce Clearances Fireplace Hearth ProtectionClearance to Surrounding Combustible Materials Wall Shields = 1 25 mmAlcove Installations Construction RequirementsMadison 1655 Series Clearance Chart Madison 1655 Series Clearance Diagram ST563 Assembly Install the Outside Air Adaptor With Rear Heat ShieldHow the Madison Works Use the Air Control Setting that Works Best for YouOperation Burn Only High-Quality WoodMadison Control Settings Starting and Maintaining a FireAsh Disposal Refuel While the Embers Are Still HotMaintenance Clean the Primary Air Outlet CreosoteInside/Outside Location Draft ManagementSteel Chimney Flue SizingBackpuffing Single VentingFuel Negative PressureMadison Woodburning Stove Madison Woodburning Stove Vermont Castings Madison Warranty Vermont Castings, Majestic Products

1655, 1656, 1657, 1658, 1659 specifications

Vermont Castings has long been synonymous with high-quality cast iron stoves and fireplaces, and models 1655, 1656, 1657, 1658, and 1659 are prime examples of the craftsmanship and innovation that define the brand. Each model showcases a unique combination of features, technologies, and characteristics designed to enhance the home heating experience.

The Vermont Castings 1655, also known as the Defiant wood stove, is revered for its exceptional heating efficiency and classic design. With a large firebox, it can accommodate logs up to 18 inches long, making it an ideal choice for long, uninterrupted burns. Its dual door design not only provides ease of access but also enhances the aesthetic appeal with its elegantly arched glass. The stoves feature the brand's innovative Catalyst technology, which ensures complete combustion of gases, reducing emissions while maximizing heat output.

The 1656 model, known as the Intrepid II, is compact yet powerful. It is perfect for smaller spaces, providing significant heat without compromise. With its traditional styling and hand-crafted quality, it stands as a testament to Vermont Castings' commitment to aesthetics. The stove incorporates a secondary combustion system, which enhances efficiency by reburning flue gases, ensuring a cleaner burning process.

The 1657 model, also recognized as the Vigilant, incorporates radiant and convective heating, which is perfect for larger rooms. This model is equipped with advanced clean-burning technology, facilitating a longer burn time and reducing the frequency of reloads. The stovetop is designed to maintain heat, allowing for cooking or warming food, illustrating its versatility.

In contrast, the 1658 model, known as the Resolute, features an elegant yet rugged design that complements various interiors. Its air-wash system keeps the glass door clean, providing an unobstructed view of the flames. The Resolute is designed for easy operation, with an adjustable damper that tailors airflow, further optimizing efficiency according to user preferences.

Finally, the 1659, or the Encore model, stands out with its revolutionary two-in-one design that allows for top or front loading. This model is known for its exceptional heat retention and long burn times, catering to homeowners who value convenience and performance. Its eco-friendly features include reduced emissions and high-efficiency ratings that meet modern environmental standards.

In summary, Vermont Castings' 1655, 1656, 1657, 1658, and 1659 models offer an array of features that prioritize efficiency, performance, and style. From their unique combustion technologies to their stunning craftsmanship, these stoves represent some of the best options in the market for effective home heating solutions. Each model is a testament to Vermont Castings' enduring legacy of quality and innovation in the world of wood-burning appliances.