Vermont Casting installation instructions Specifications, Intrepid II, Model 1990CE

Intrepid II Woodburning Stove

Specifications

Intrepid II, Model 1990CE

Nominal heat output		6.2 kW (21, 100 BTU/hr)1
Minimum flue draught		12 Pa (0.048” WG)
Mean flue gas temp		337° C (639° F)
Efficiency (space heating)		72.8%
Area heated	Up to 112 sq. m (1200 sq. ft.)1
Fuel size/type		410 mm (16”) wood
Flue mass gas flow		5.6 g/s
CO Emissions (@ 13% O2)		2900 ppm
Loading		Front or top
Chimney connector		152 mm (6”) diameter
Chimney flue size		152 mm (6”) minimum
Flue exit position		Reversible, top or rear
Primary air	Manual set, thermostatically maintained
Secondary air		Self-regulating
Ash handling system		Removable ash pan
Glass panels		High temperature ceramic

Weight	101 kg (233 lbs.)
Width (leg-to-leg)	545 mm (21¹⁄₂”)
Depth (leg-to-leg)	350 mm (13³⁄₄”)
Height to top of flue collar:
with regular legs	635 mm (25”) top exit
...............................................	610 mm (24”) rear exit
with optional short legs	535 mm (21”) top exit
............................................	500 mm (19³⁄₄”) rear exit

1.This value can vary depending on how the stove is operated, the type and moisture content of the fuel used, as well as the design, construction and climatic location of your home. Figures shown are based on nominal fuel consumption obtained under laboratory conditions and on average efficiencies.

510 mm (20") DRAWINGS NOT TO SCALE

545mm

(21���")

	540 mm (21���")	31 mm
	460 mm (18")	(1���")
540 mm (21���")
		C
		L
610 mm	640 mm
(24")
	(25���")	520 mm
	Top exit	(20���")
	flue collar
	height

180mm

(7���")

545 mm (21���") 350 mm (13���")

Fig. 1 Intrepid II 1990CE dimensions.

30003840 3