Vermont Casting 1638, 1635 Alcove Installations, Stove Installed Stove in Corner Parallel to Wall

Page 13

Vermont Castings Seville

		UNPROTECTED SURFACES			PROTECTED SURFACES
	Stove Installed		Stove in Corner		Stove Installed		Stove in Corner
	Parallel to Wall		Stove in Corner		Parallel to Wall		Stove in Corner
	Parallel to Wall				Parallel to Wall
With		B		C
Single-wall		B		C		E		F
Connector						E		F
	A		C		D			F
With
Single-wall
Connector		H		I		K		L
and		H		I		K		L
Connector
Heat
Shields,
or
Double-wall	G		I		J			L
Connector	G		I		J			L
								ST486
	Alcove Installations							D
The Seville is approved for installation into an alcove						C
constructed to maintain the clearances diagramed in								E
Figure 18.								E
					A			B
								ST487
						Unprotected		Protected
						Surfaces		Surfaces
						Surfaces		(per NFPA 211)
								(per NFPA 211)
					A	56”		52”
					Min. Width	(1422mm)		(1321mm)
					B	34”		27”
					Max. Depth	(864mm)		(686mm)
					C	36”		24”
					Stovetop to Ceiling	(914mm)		(610mm)
					D	18”		12”
					Connector to Ceiling	(457mm)		(305mm)
					E	17”		10”
					Connector to Wall	(432mm)		(254mm)
				Fig. 18 Alcove specifications.
30001490								13

Image 13

Contents Seville Installation Accessories Table of ContentsIntroduction Seville, Model SpecificationsChimneys InstallationMasonry Chimneys Prefabricated Chimneys Chimney Connector GuidelinesChimney Size Masonry Chimneys, contdSingle-wall Chimney Connectors Double-wall Chimney ConnectorsSecuring the Single-wall Connector to a Masonry Chimney Freestanding InstallationsWall Pass-throughs Connection Above the FireplaceAlternate methods approved by the Nfpa Wall Pass-through with ventilated steel thimble Fireplace Hearth Protection Floor ProtectionSafe Ways To Reduce Clearances Clearance to Surrounding Combustible MaterialsWall Shields Wall shields Stove Clearance Seville 1635 Clearance ChartStove Installed Stove in Corner Parallel to Wall Alcove InstallationsUnprotected Protected Surfaces Install the Snapstat AssemblyHardware Bag contents Unpack the StoveInstall the Rheostat Switch Install the FanInstall Stove Legs Pedestal AssemblyAttach the Chimney Connector Install the Outside Air AdapterOperation Use the Air Control Setting that Works Best for YouHow the Seville Works Burn Only High-Quality WoodBurn Rate Primary Air Control Shutter Position Starting and Maintaining a Fire Conditioning Your StoveStart a fire with small, dry kindling Ash Disposal Refuel While the Embers Are Still HotSmoke Detectors Maintenance Creosote Adjust the DoorClean the Primary Air Outlet Annual MaintenanceDraft Management Inside/Outside Location Steel ChimneyFlue Sizing Pipe & Chimney LayoutNegative Pressure BackpuffingConclusion Seville Woodburning Stove Seville Vermont Castings, Majestic Products

UNPROTECTED SURFACES

PROTECTED SURFACES

Stove Installed

Stove in Corner

Parallel to Wall

Alcove Installations

Unprotected

Protected

Surfaces

Fig. 18 Alcove specifications.