Vermont Casting 2550CE Surface Thermometer is a Valuable Guide to Operation

Page 15

Store wood under cover to keep it dry. The longer it is stored, the better heating and fireviewing performance you will enjoy. Even for short-term storage, however, keep wood a safe distance from the heater and keep it out of the areas around the heater used for refueling and ash removal.

A Surface Thermometer is a

Valuable Guide to Operation

An optional surface thermometer lets you know when to adjust the air control, when to refuel, and when your catalyst is operating properly. (Fig. 24)

ST523

Fig. 24 Take temperature readings with the thermometer located in the middle of the griddle.

For example, when the thermometer registers at least 230° C (450° F) after start-up you know the stove is hot enough to begin catalytic combustion and it may be time to close the damper. Note that the stove will warm up much sooner than the chimney, though; a warm chimney is the key to easy, effective stove opera- tion. Please review the draft management information on Page 23 to see how the size, type, and location of your chimney will affect your stove operation. When thermometer readings drop below 175° C (350° F) it’s time to adjust the air control for a higher burn rate or to reload the stove. A temperature reading over 385° C (750° F) is a sign to cut back on the air supply to slow the burn rate.

Use the following temperature ranges as a guide to operation:

•Readings in the 175-260° C (350-500° F) range indicate low to medium heat output.

•260-315° C (500-600° F) readings indicate me- dium heat output.

•Readings of 315-400° C (600-750° F) indicate high heat output. Operating your Encore continuously at griddle temperatures of 385° C (750° F) or higher may damage the cast iron or enamel finish.

Use the Air Control Settings

that Work Best for You

No single air control setting will fit every situation. Each installation will differ depending on the quality of the fuel, the amount of heat desired, and how long you wish the fire to burn; outdoor air temperature and pressure also affect draft.

Encore Woodburning Stove

The control setting also depends on your particular installation’s “draft,” or the force that moves air from the stove up through the chimney. Draft is affected by such things as the length, type, and location of the chimney, local geography, nearby obstructions, and other factors. Refer to Page 23 for details on how the installation af- fects performance.

Too much draft may cause excessive temperatures in the Encore, and could even damage the combustor. On the other hand, too little draft can cause backpuffing into the room and/or the “plugging” of the chimney or combustor.

How do you know if your draft is excessively high or low? Symptoms of too much draft include an uncontrol- lable burn or a glowing-red stove part. A sign of inad- equate draft is smoke leaking into the room through the stove or chimney connector joints, low heat, and dirty glass.

In some newer homes that are well-insulated and weather-tight, poor draft may result from insufficient air in the house. In such instances, an open window near the stove on the windward side of the house will provide the fresh air needed.

In some areas provisions for outside combustion air are required. Refer to section 2 of Document J which requires an outside air vent for appliances with power outputs over 5 kW. Always refer to national and local codes to determine your specific requirements.

Your Encore will accept a duct to deliver outside air for combustion.

When first using the stove, keep track of the air control settings. You will quickly find that a specific setting will give you a fixed amount of heat. It may take a week or two to determine the amount of heat and the length of burn you should expect from various settings.

Most installations do not require a large amount of combustion air, especially if adequate draft is available.

Do not for any reason attempt to increase the firing of your heater by altering the air control adjustment range outlined in these directions.

Use the following air control settings as a starting point to help determine the best settings for your installation. Each is described as a fraction of the total distance the lever may be moved from right to left.

Encore Control Settings

Burn Rate

Primary Air Control

Low

From far right to 1/3

 

the distance to left

Medium

From 1/3 to 2/3 the distance

 

to left

High

From 2/3 the distance

 

to left to far left

30003842

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Encore Welcome Table of ContentsEncore Model 2550CE SpecificationsInstallation Outside AirChimney Height Prefabricated Chimneys Chimney Connector GuidelinesWhat Kind of Chimney to Use Masonry ChimneysSingle-wall Chimney Connectors Double-wall Chimney ConnectorsAbove the Fireplace Securing the Single-wall Connector to a Masonry ChimneyFreestanding Installations Fireplace InstallationsWall Pass-Throughs Through the FireplaceFloor Protection for Fireplace Installations HearthsKeep the Stove a Safe Distance From Surrounding Materials Summary of Clearances Safe Ways to Reduce ClearancesConnecting fluepipe clearances Assembly Damper Directs Air Flow Within the Stove OperationEncore Controls Single Air Control Regulates Heat Output and Burn TimeBurn Only High-Quality Wood Two Ways to Add FuelInfrared Reflective Glass Panels For Clear Fire Viewing Andirons Help Protect the GlassUse the Air Control Settings That Work Best for You Encore Control SettingsSurface Thermometer is a Valuable Guide to Operation High-Efficiency Wood Burning with Catalytic Combustion Conditioning Your StoveStarting and Maintaining a Wood Fire Add larger pieces of wood as the fire begins to burn well Refuel While the Embers Are Still HotAsh Disposal Flue Sizing Draft ManagementSteel Chimney Indoor / Outdoor locationBack-puffing Draft TestingCreosote FuelMaintenance Tighten the Damper Handle as Needed Adjust the Damper as NeededHow to Adjust the Door Latches Check the Operation Primary Air ShutterCatalytic Element Inspection and Cleaning When to Suspect a Combustor ProblemInspecting the Combustor Gasket Diameter ...And the Parts it Seals Replace the Stove Gaskets as NeededAdjust the Door If Necessary Permanent Encore GasketsChimney System Creosote Annual Maintenance Appendix Catalytic Combustor Encore Woodburning Stove Encore Woodburning Stove Shell Enamel Parts Encore Color Warranty CFM Corporation

2550CE specifications

The Vermont Casting 2550CE is a remarkable wood-burning stove that embodies both efficiency and style, making it a preferred choice for those who desire a reliable heating solution combined with aesthetic appeal. This model stands out in the realm of traditional wood stoves, offering an exceptional blend of performance features and innovative technologies.

At the heart of the 2550CE is its robust cast iron construction, which contributes to superior heat retention and distribution. Cast iron is known for its ability to radiate warmth long after the fire has dwindled, ensuring a cozy atmosphere in your living space. This model also features a large ceramic glass door, providing a captivating view of the flames while allowing for easy monitoring of the fire's conditions.

One of the defining characteristics of the Vermont Casting 2550CE is its advanced secondary combustion system. This technology enhances the stove's efficiency by reburning the exhaust gases, thus extracting maximum heat from the wood and reducing emissions. This not only makes for a cleaner burn but also extends the burn time, allowing users to enjoy an extended period of warmth with fewer reloads.

The 2550CE is designed with functionality in mind, equipped with an easy-to-use air control system that enables precise regulation of airflow. This allows users to adjust the fire’s intensity based on their immediate heating needs, maximizing both comfort and fuel efficiency. Moreover, the stove’s large firebox accommodates logs up to 18 inches in length, making it practical for those who prefer to minimize the frequency of reloads.

In terms of style, the Vermont Casting 2550CE features a classic design that complements various interior decor styles, including rustic, traditional, and modern settings. Available in several finishes, including matte black and enamel options, the stove can be customized to match individual tastes and home aesthetics.

The commitment to sustainability is another significant aspect of the 2550CE. With its lower emissions rates complying with EPA standards, homeowners can enjoy a warm and inviting environment while being mindful of their environmental impact. Overall, the Vermont Casting 2550CE combines time-tested craftsmanship with modern technology, making it an ideal choice for anyone seeking an efficient and elegant wood-burning stove.
Top Page Image Contents