Louisville Tin and Stove BFT302, BFT201, BFT301, BFT102, BFT202 For Your Safety Read Before Lighting

Page 11

BFT101, BFT201, BFT301 - NATURAL GAS / BFT102, BFT202, BFT302 - L.P. GAS

FOR YOUR SAFETY READ BEFORE LIGHTING

WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.

A.This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly.

B.BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS:

•Do not try to light any appliance.

•Do not touch any electric switch, do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, don’t try to repair it, call a qualified service technician. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

LIGHTING INSTRUCTIONS

1.STOP! Read the information on the safety label.

2.Depress gas control knob slightly and turn

clockwise to “OFF”.

3.Turn off electric for optional blower.

Gas

Control

Knob

NOTE: Knob can not be turned from “PILOT” to “OFF” unless knob is depressed slightly. Do not force.

4.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow “B” in the information on the safety label. If you don’t smell gas, go to the next step.

5.Locate pilot.

6.Locate piezo ignitor button on top of heater.

7. Turn gas control knob counterclockwise

to

“PILOT”.

8.Depress gas control knob and hold in. Immediately begin alternately pushing and releasing piezo ignitor button, observing pilot, until pilot is lit. Continue to hold the control knob in for about one

(1) minute after the pilot is lit. Release the gas control knob and it will pop back up. Pilot should remain lit. If pilot goes out, repeat steps 2 thru 7.

•If knob does not pop up when released, STOP and immediately call your service technician or gas supplier.

•If the pilot will not stay lit after several tries, turn the gas control knob to “OFF” and call your service technician or gas supplier.

9.Turn on electric for optional blower.

10.Turn gas control knob counterclockwise to “ON”.

TO TURN OFF GAS TO APPLIANCE

1.Depress gas control knob slightly and turn clockwise to “OFF”.

Page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents What to do if YOU Smell GAS Blue Flame Vent Free HeatersIllustrated Parts BREAKDOWN……… Tools & Additional SUPPLIES… IntroductionOperation Room Heater SpecificationsSafety Instructions Introduction CONT’DFresh AIR for COMBUSTION, Ventilation and Heat Distribution Location InstallationTools and Additional Supplies Required ClearancesFeet Pipe Length NA GasturalPropane GAS Wall Mount Installing Heater Wall Mount BFT10Installing VF-FSK Floor Base KIT Natural GAS GAS ConnectionBurner Orifice Specific ElevationFor Your Safety Read Before Lighting Proper Operation ODS / Pilot Flame ODS/PILOT MaintenanceCabinet Main BurnerBlower Instructions Symptom Possible Causes Corrective Action Trouble Shooting GuideBFT101 BFT102 BFT201 BFT202 BFT301 BFT302 Model Included NAT. GAS L.P. GASModel Numbers NAT Tampering is Dangerous Critical Safety Points to RememberTable a Limited Warranty

BFT301, BFT302, BFT102, BFT201, BFT202 specifications

Louisville Tin and Stove has established itself as a reputable name in the world of heating solutions, offering a range of innovative products designed for both efficiency and comfort. Among their notable offerings are the BFT101, BFT302, BFT201, BFT102, and BFT202 models. Each of these units boasts unique features, technologies, and characteristics that cater to various customer needs.

The BFT101 is designed with compact living spaces in mind. It offers an intuitive user interface that ensures easy operation. Its efficient heat exchange system allows for rapid heating, providing warm air quickly and effectively. The BFT101's sleek design fits seamlessly into any room, making it an aesthetic addition to home décor while ensuring functionality.

The BFT302 takes efficiency a notch higher with advanced thermal technology. This model is equipped with a dual-fuel capability, allowing users to switch between different energy sources, such as gas or electric. The BFT302's smart thermostat provides precise temperature control, optimizing energy consumption without compromising comfort. Additionally, it comes with a built-in safety mechanism that ensures the unit operates seamlessly and safely.

For larger spaces, the BFT201 model stands out with its powerful heating capabilities. This unit features a robust construction designed to withstand prolonged usage while delivering consistent heat throughout the area. The BFT201 is also compatible with smart home technology, allowing users to control the heating remotely, a feature that provides convenience and enhances user experience.

The BFT102 is favored for its versatility. It operates efficiently in various environments, whether it’s a residential setting or a commercial space. Equipped with multiple heating settings, the BFT102 can easily adapt to changing temperature needs. Its low emissions make it an eco-friendly choice, aligning with sustainability goals without sacrificing performance.

Lastly, the BFT202 offers a combination of elegance and innovation. This model is equipped with advanced filtration technology that not only heats efficiently but also cleans the air, ensuring a healthier environment. The BFT202 features a whisper-quiet operation, making it suitable for bedrooms and offices where noise reduction is important.

In summary, the Louisville Tin and Stove BFT series, including the BFT101, BFT302, BFT201, BFT102, and BFT202, provides a comprehensive range of heating solutions that cater to a variety of spaces and customer preferences. Each model is designed with state-of-the-art technology, focusing on energy efficiency, safety, and user convenience, making them excellent choices for modern heating needs.
Top Page Image Contents